WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: problem connecting to wifi  (Read 1848 times)

Offline jls

  • Hero Member
  • *****
  • Posts: 2135
problem connecting to wifi
« on: July 15, 2015, 01:12:53 PM »
Hi
I have the following wifi inside my laptop:
Code: [Select]
Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)with both trusty and vivid wifi.sh doesn't connect, it tries to get an ip with dhcp but it fails.
with trusty I can connect using the enlightenment  connection manager module, but it fails in vivid.
Code: [Select]
jls@box:~$ iwlist eth1 scanning
eth1      Scan completed :
          Cell 01 - Address: 24:7F:3C:41:06:AF
                    ESSID:"WebCubeNew-06AF"
                    Protocol:IEEE 802.11bg
                    Mode:Master
                    Frequency:2.412 GHz (Channel 1)
                    Encryption key:on
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
                              48 Mb/s; 54 Mb/s
                    Quality=87/100  Signal level=-44 dBm
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
                    Extra: Last beacon: 2110ms ago

dCore user

Offline Jason W

  • Administrator
  • Hero Member
  • *****
  • Posts: 9730
Re: problem connecting to wifi
« Reply #1 on: July 18, 2015, 06:31:44 AM »
My ipw2200 wireless on my laptop is slowly going out, so I am not really able to verify wifi.sh working or failing for that device.

I do have a usb wireless I use ndiswrapper with, I will try to see if I can find out anything.

Offline Onyarian

  • Sr. Member
  • ****
  • Posts: 337
Re: problem connecting to wifi
« Reply #2 on: July 18, 2015, 10:25:46 AM »
Hi,
If it helps, with Trusty I don't have problems with wifi.sh, nor in my notebook with integrated wifi nor my desktop with an usb-wireless

dCore-trusty.15.07.11

notebook integrated:
Quote
Ethernet controller: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01)

Quote
tc@ub-dC-tr-aao:~$ iwlist wlan0 scanning
wlan0     Scan completed :
          Cell 01 - Address: 44:D4:E0:CB:39:22
                    Channel:1
                    Frequency:2.412 GHz (Channel 1)
                    Quality=70/70  Signal level=-40 dBm 
                    Encryption key:on
                    ESSID:"XZ1C"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s
                              36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=000000000eade523
                    Extra: Last beacon: 1741153ms ago
                    IE: Unknown: 0004585A3143
                    IE: Unknown: 010482848B96
                    IE: Unknown: 030101
                    IE: Unknown: 2A0100
                    IE: Unknown: 32080C1218243048606C
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK

I'm not at home and can't say witch usb-wirless model it's.