WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: Allwinner A10 Release  (Read 2128 times)

Offline Jason W

  • Administrator
  • Hero Member
  • *****
  • Posts: 9474
Allwinner A10 Release
« on: February 16, 2015, 06:22:11 PM »
The current release has been updated to the latest release candidate.

http://tinycorelinux.net/dCore/armv7/Allwinner-A10/

Offline Jason W

  • Administrator
  • Hero Member
  • *****
  • Posts: 9474
Re: Allwinner A10 Release
« Reply #1 on: May 04, 2015, 10:53:07 PM »
Updated to reflect the latest changes.

http://tinycorelinux.net/dCore/armv7/Allwinner-A10/

Offline Jason W

  • Administrator
  • Hero Member
  • *****
  • Posts: 9474
Re: Allwinner A10 Release
« Reply #2 on: May 31, 2015, 05:33:03 PM »
Updated to reflect the latest changes.

http://tinycorelinux.net/dCore/armv7/Allwinner-A10/

Offline Jason W

  • Administrator
  • Hero Member
  • *****
  • Posts: 9474
Re: Allwinner A10 Release
« Reply #3 on: September 05, 2015, 09:45:41 AM »
Updated to reflect the latest changes.

http://tinycorelinux.net/dCore/armv7/Allwinner-A10/

Offline Jason W

  • Administrator
  • Hero Member
  • *****
  • Posts: 9474
Re: Allwinner A10 Release
« Reply #4 on: August 17, 2017, 01:42:29 PM »
Uploaded a new uCore cut to reflect the latest dCore changes.

Please test.

http://tinycorelinux.net/dCore/armv7/Allwinner-A10/

Offline vinikon

  • WikiUser
  • *
  • Posts: 36
Re: Allwinner A10 Release - scrip fails to execute
« Reply #5 on: February 12, 2018, 05:29:18 AM »
Hi,
I just tried to follow all the instructions and run the script.

At some point it gives me a message:
/dev/sdg
mount: applet not found
Mount failed - Abort

What could be the cause?
I'm running 4.2.9-tinycore on a PC,
the card is a mini SD card plugged in a kind of "multi-card adapter" which goes in a USB port.
It's seen as an /dev/sdg device

Thanks in advance,

Vik
An inspired user of TinyCore...

Offline vinikon

  • WikiUser
  • *
  • Posts: 36
Re: Allwinner A10 Release-script fails
« Reply #6 on: February 12, 2018, 05:40:45 AM »
Forgot:

When checking the device - I see an empty Linux partition. There's no files nothing.

I'll try to perform manually all instrucitons in the script.

May be it's better to write a text guide aka: 1. create a linux partition, 2. dd files to it, 3. sync(hdparm) etc.

Thanks
An inspired user of TinyCore...

Offline vinikon

  • WikiUser
  • *
  • Posts: 36
Re: Allwinner A10 Release-script fails
« Reply #7 on: February 12, 2018, 05:44:02 AM »
My thougt is that in the script(the fdisk section) you didn't specify which type of partition you should have( I think it should be a vfat).

Just an idea....

Vik
An inspired user of TinyCore...

Offline vinikon

  • WikiUser
  • *
  • Posts: 36
Re: Allwinner A10 Release - plugged as SD card
« Reply #8 on: February 12, 2018, 05:51:42 AM »
So,
I tried to plug the card in the SD card slot:

I have this:
"/dev/mmcblk01: no such file or directory"
/dev/mmcblk0:
mount: applet not found
Mount failed! - Abort"

Any ideas??
An inspired user of TinyCore...

Offline vinikon

  • WikiUser
  • *
  • Posts: 36
Re: Allwinner A10 Release-MANUAL install
« Reply #9 on: February 12, 2018, 06:50:34 AM »
Hi again,

I finally did the manual install - dd the two files(uboot)
Created a small vfat partitition for all those which are copied automatically and created a big Linux and swap part.

All is working well. Have the wifi functionning.

Thanks for your work!!!
An inspired user of TinyCore...

Offline vinikon

  • WikiUser
  • *
  • Posts: 36
Re: Allwinner A10 Release-X - doesn't launch
« Reply #10 on: February 12, 2018, 07:02:30 AM »
I followed instructions on how to install X - and after all downloading and installing - it says"connection to xserver lost"

I also wanted to ask how to install it on NAND... may be a simple "DD" and it is ok?

Thanks in advance
An inspired user of TinyCore...