WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: piCore-6.0 released  (Read 69434 times)

Offline Spike

  • Newbie
  • *
  • Posts: 3
Re: piCore-6.0 released
« Reply #45 on: April 09, 2015, 01:35:50 AM »
dnsmasq added to armv6/armv7 repo.
Thanks.  Working well for me.

Offline lykkedk

  • Full Member
  • ***
  • Posts: 182
Re: piCore-6.0 released
« Reply #46 on: April 11, 2015, 12:31:50 AM »
Hi...  :)

When i try to build something (compile-essentials loaded) i allways got this error.

Have been struggling with this error for long now?

Any suggestions ?

Quote
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... /lib/cpp
configure: error: in `/home/tc/bluetooth/bluez-5.30':
configure: error: C preprocessor "/lib/cpp" fails sanity check

Rgds; Jesper.

Offline bmarkus

  • Administrator
  • Hero Member
  • *****
  • Posts: 7183
    • My Community Forum
Re: piCore-6.0 released
« Reply #47 on: April 11, 2015, 01:21:04 AM »
DId you install linux-3.12.y_api_headers.tcz ?
Béla
Ham Radio callsign: HA5DI

"Amateur Radio: The First Technology-Based Social Network."

Offline lykkedk

  • Full Member
  • ***
  • Posts: 182
Re: piCore-6.0 released
« Reply #48 on: April 11, 2015, 01:45:51 AM »
No... -Thanks  :D

I just did, and now it's going beyond that point, but stopping now at :

Quote
checking for GLIB... no
configure: error: GLib >= 2.28 is required
tc@PlayBox:~/bluetooth/bluez-5.30$


Online Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14516
Re: piCore-6.0 released
« Reply #49 on: April 11, 2015, 01:49:33 AM »
each time you get a message like that you need to load the corresponding *dev file, in this case glib2-dev

Online curaga

  • Administrator
  • Hero Member
  • *****
  • Posts: 10957
Re: piCore-6.0 released
« Reply #50 on: April 11, 2015, 01:58:30 AM »
DId you install linux-3.12.y_api_headers.tcz ?

I recall you said this would be added to the dep file?
The only barriers that can stop you are the ones you create yourself.

Offline lykkedk

  • Full Member
  • ***
  • Posts: 182
Re: piCore-6.0 released
« Reply #51 on: April 11, 2015, 02:07:12 AM »
Juanito.

I allready loaded the glib2-dev... didn't make a change...

Rgds; Jesper.

Online Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14516
Re: piCore-6.0 released
« Reply #52 on: April 11, 2015, 02:19:08 AM »
Take a look in config.log, maybe there are some more clues as to the error there?

Offline lykkedk

  • Full Member
  • ***
  • Posts: 182
Re: piCore-6.0 released
« Reply #53 on: April 11, 2015, 02:48:35 AM »
Juanito  :)

Gives me not really something either!


Online curaga

  • Administrator
  • Hero Member
  • *****
  • Posts: 10957
Re: piCore-6.0 released
« Reply #54 on: April 11, 2015, 02:55:26 AM »
checking for pkg-config: no

Why is that not installed?
The only barriers that can stop you are the ones you create yourself.

Offline lykkedk

  • Full Member
  • ***
  • Posts: 182
Re: piCore-6.0 released
« Reply #55 on: April 11, 2015, 03:02:04 AM »
Hi.

Quote
checking for pkg-config: no

Why is that not installed?

I don't know ? (I dont know what it is either  :o)

Online curaga

  • Administrator
  • Hero Member
  • *****
  • Posts: 10957
Re: piCore-6.0 released
« Reply #56 on: April 11, 2015, 03:49:08 AM »
It is the tool that checks if a package is installed and what version, like glib 2.28 ;)

There's a great number of differences between the standard compiletc deps and the piCore compile-essentials:
Code: [Select]
--- compiletc.tcz.tree  2015-04-11 13:50:31.012899352 +0300
+++ compile-essentials.tcz.tree 2015-04-11 13:50:37.382899077 +0300
@@ -1,31 +1,24 @@

+autoconf.tcz
+automake.tcz
 binutils.tcz
-bison.tcz
 cloog.tcz
-diffutils.tcz
-e2fsprogs_base-dev.tcz
 file.tcz
-findutils.tcz
-flex.tcz
-gawk.tcz
 gcc_base-dev.tcz
 gcc_libs-dev.tcz
 gcc_libs.tcz
 gcc.tcz
+glibc_add_lib.tcz
+glibc_apps.tcz
 glibc_base-dev.tcz
+glibc_gconv.tcz
 gmp.tcz
-grep.tcz
 isl.tcz
-linux-3.16.2_api_headers.tcz
+libltdl.tcz
+libtool.tcz
 m4.tcz
 make.tcz
 mpc.tcz
 mpfr.tcz
-ncurses-common.tcz
-ncurses.tcz
 patch.tcz
-pkg-config.tcz
-readline.tcz
-sed.tcz
-util-linux_base-dev.tcz
-zlib_base-dev.tcz
+perl5.tcz

These seem to cause much confusion...
The only barriers that can stop you are the ones you create yourself.

Offline lykkedk

  • Full Member
  • ***
  • Posts: 182
Re: piCore-6.0 released
« Reply #57 on: April 11, 2015, 04:15:23 AM »
Okay thanks.

So i guess i am a bit stranded here right now.

Case is, i have my playbox, sitting streaming music all day long  :) (squeezelite / NAS-squeezeboxserver) combo.
This is working perfect.

So i just thought it would be fun to have the possiblity to stream bluetooth audio, from eg. phone to my playbox.

I think i open up a new thread in forum!

Rgds; Jesper.

Offline so.heil

  • Newbie
  • *
  • Posts: 3
Re: piCore-6.0 released
« Reply #58 on: April 29, 2015, 09:20:05 AM »
Hi,

I got my Raspberry Pi 2. I installed piCore-6.0-X (also piCore-6.0-SSH) images and got stuck on the Rainbow Screen. The Pi doesn't boot - apply power, red light comes on, green light flashes a couple of times and then I get a multi-color screen and that's where it hangs. I'm a Mac user. Any recommendations is highly appreciated.


Here is my config file:

# Specify iniramfs
ramfsfile=6.0.gz
ramfsaddr=0x00a00000
#-----------------------------------------------------------------------
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details

# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1

# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1

# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16

# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720

# uncomment if hdmi display is not detected and composite is being output
#hdmi_force_hotplug=1

# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1

# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2

# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4

# uncomment for composite PAL
#sdtv_mode=2

# comment lines below to disable overclocking
arm_freq=900
core_freq=450
sdram_freq=450


Offline bmarkus

  • Administrator
  • Hero Member
  • *****
  • Posts: 7183
    • My Community Forum
Re: piCore-6.0 released
« Reply #59 on: April 29, 2015, 09:45:03 AM »
Probably you installed the Rpi image instead of Rpi2. Check release announcement.
Béla
Ham Radio callsign: HA5DI

"Amateur Radio: The First Technology-Based Social Network."