WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: piCore-5.2.1rc2  (Read 9670 times)

Offline sbp

  • Sr. Member
  • ****
  • Posts: 429
    • piCorePlayer homepage
Re: piCore-5.2.1rc2
« Reply #15 on: March 16, 2014, 06:01:48 AM »
Hi bmarkus

There are quite a few errors during booting (not shown in dmesg) is there another log available, so that I can read them?

Steen

Offline bmarkus

  • Administrator
  • Hero Member
  • *****
  • Posts: 7003
    • My Community Forum
Re: piCore-5.2.1rc2
« Reply #16 on: March 16, 2014, 06:04:21 AM »
Hi bmarkus

There are quite a few errors during booting (not shown in dmesg) is there another log available, so that I can read them?

Steen

You can try to enable syslog with syslog boot option. However depending on error they may be not logged. pause boot option can be useful to see them.
Béla
Ham Radio callsign: HA5DI

"Amateur Radio: The First Technology-Based Social Network."

Offline bmarkus

  • Administrator
  • Hero Member
  • *****
  • Posts: 7003
    • My Community Forum
Re: piCore-5.2.1rc2
« Reply #17 on: March 16, 2014, 06:05:58 AM »
Hi bmarkus

Thanks, you fixed it, now both my Ralink and Realtek wifi adaptors are working perfectly.

Steen

Sounds good, thanks for testing. I updated wifi.tcz in the x86 repo too.
Béla
Ham Radio callsign: HA5DI

"Amateur Radio: The First Technology-Based Social Network."

Offline sbp

  • Sr. Member
  • ****
  • Posts: 429
    • piCorePlayer homepage
Re: piCore-5.2.1rc2
« Reply #18 on: March 16, 2014, 06:37:31 AM »
The error (only seen on attached screen) not showing up in putty or dmesg or syslog. So this is typed in via keyboard:

Code: [Select]
udevadm settle - timeout of 5 seconds reached, the event queue contains:
/sys/devices/platform/bcm2708_usb_usb1/1-1/1-1./1-1.3/1:1.0/input/input0 (1586)
/sys/devices/platform/bcm2708_usb_usb1/1-1/1-1./1-1.3/1:1.0/input/input0/event0 (1587)
/sys/devices/platform/bcm2835_AUD0.0 (1590)
/sys/devices/platform/bcm2835_AUD1.1 (1591)
/sys/devices/platform/bcm2835_AUD2.2 (1592)
/sys/devices/platform/bcm2835_AUD3.3 (1593)
/sys/devices/platform/bcm2835_AUD4.4 (1594)
/sys/devices/platform/bcm2835_AUD5.5 (1595)
/sys/devices/platform/bcm2835_AUD6.6 (1596)
/sys/devices/platform/bcm2835_AUD7.7 (1597)
/sys/devices/platform/bcm2835_hwmon.0 (1598)
/sys/devices/platform/ess9018-codec (1600)
/sys/devices/platform/mmc_host/mmc0/mmc0:b368/block/mmcblk0 (1606)
/sys/devices/platform/mmc_host/mmc0/mmc0:b368/block/mmcblk0/mmcblk0p1 (1607)
/sys/devices/platform/mmc_host/mmc0/mmc0:b368/block/mmcblk0/mmcblk0p2 (1608)
/sys/devices/platform/pcm1794a-codec (1609)
/sys/devices/platform/pcm5102a-codec (1610)


I have no idea what is causing these errors. It is a clean piCore5.2.1 rc2 with wifi packages installed and nothing else.

Steen


Offline bmarkus

  • Administrator
  • Hero Member
  • *****
  • Posts: 7003
    • My Community Forum
Re: piCore-5.2.1rc2
« Reply #19 on: March 16, 2014, 06:57:05 AM »
Expect these messages, do you experience any issue using the system?
Béla
Ham Radio callsign: HA5DI

"Amateur Radio: The First Technology-Based Social Network."

Offline sbp

  • Sr. Member
  • ****
  • Posts: 429
    • piCorePlayer homepage
Re: piCore-5.2.1rc2
« Reply #20 on: March 16, 2014, 07:17:49 AM »
No, I have almost ported piCorePlayer to the new version and wifi and ALSA is working really good - no issues what so ever.

Regards
Steen

Offline Paul_123

  • Sr. Member
  • ****
  • Posts: 480
Re: piCore-5.2.1rc2
« Reply #21 on: March 16, 2014, 07:25:34 AM »
wifi working here too.

Offline bmarkus

  • Administrator
  • Hero Member
  • *****
  • Posts: 7003
    • My Community Forum
Re: piCore-5.2.1rc2
« Reply #22 on: March 16, 2014, 07:31:37 AM »
wifi working here too.

Thanks, as I see it can be marked safely as solved. Hopefully Gerrelt gets the same result :)
« Last Edit: March 16, 2014, 07:33:46 AM by bmarkus »
Béla
Ham Radio callsign: HA5DI

"Amateur Radio: The First Technology-Based Social Network."

Offline bmarkus

  • Administrator
  • Hero Member
  • *****
  • Posts: 7003
    • My Community Forum
Re: piCore-5.2.1rc2
« Reply #23 on: March 16, 2014, 07:35:49 AM »
The error (only seen on attached screen) not showing up in putty or dmesg or syslog. So this is typed in via keyboard:

Code: [Select]
udevadm settle - timeout of 5 seconds reached, the event queue contains:
/sys/devices/platform/bcm2708_usb_usb1/1-1/1-1./1-1.3/1:1.0/input/input0 (1586)
/sys/devices/platform/bcm2708_usb_usb1/1-1/1-1./1-1.3/1:1.0/input/input0/event0 (1587)
/sys/devices/platform/bcm2835_AUD0.0 (1590)
/sys/devices/platform/bcm2835_AUD1.1 (1591)
/sys/devices/platform/bcm2835_AUD2.2 (1592)
/sys/devices/platform/bcm2835_AUD3.3 (1593)
/sys/devices/platform/bcm2835_AUD4.4 (1594)
/sys/devices/platform/bcm2835_AUD5.5 (1595)
/sys/devices/platform/bcm2835_AUD6.6 (1596)
/sys/devices/platform/bcm2835_AUD7.7 (1597)
/sys/devices/platform/bcm2835_hwmon.0 (1598)
/sys/devices/platform/ess9018-codec (1600)
/sys/devices/platform/mmc_host/mmc0/mmc0:b368/block/mmcblk0 (1606)
/sys/devices/platform/mmc_host/mmc0/mmc0:b368/block/mmcblk0/mmcblk0p1 (1607)
/sys/devices/platform/mmc_host/mmc0/mmc0:b368/block/mmcblk0/mmcblk0p2 (1608)
/sys/devices/platform/pcm1794a-codec (1609)
/sys/devices/platform/pcm5102a-codec (1610)


I have no idea what is causing these errors. It is a clean piCore5.2.1 rc2 with wifi packages installed and nothing else.

Steen

You can ignore these messages.
Béla
Ham Radio callsign: HA5DI

"Amateur Radio: The First Technology-Based Social Network."

Offline Gerrelt

  • Full Member
  • ***
  • Posts: 178
Re: piCore-5.2.1rc2
« Reply #24 on: March 16, 2014, 09:32:51 AM »
wifi working here too.

Thanks, as I see it can be marked safely as solved. Hopefully Gerrelt gets the same result :)

Yes, Gerrelt gets the same results too! Thank you for the change Béla!  8)
Everything is working fine on this release now.

Can I make one more suggestion for the wifi.sh change?
The script continuus, even when the wpa_supplicant command fails.
Could we change this line:
 
Code: [Select]
system("wpa_supplicant -i " d " -c /etc/wpa_supplicant.conf -B  -D $WPADRV >/dev/null 2>&1")
To:
Code: [Select]
  if (system("wpa_supplicant -i " d " -c /etc/wpa_supplicant.conf -B  -D $WPADRV >/dev/null 2>&1") != 0) {
     print "\n\nERROR: Could not start wpa_suppicant" > "/dev/stderr"
     exit 1
  }

That way the script will exit with an error in case the wpa_supplicant command fails.


Greetings,
    Gerrelt.
my Raspberry Pi page: http://raspberry.gerrelt.nl

Offline bmarkus

  • Administrator
  • Hero Member
  • *****
  • Posts: 7003
    • My Community Forum
Re: piCore-5.2.1rc2
« Reply #25 on: March 16, 2014, 10:54:50 AM »
Gerrelt

thanks, I will apply your change.

Béla
Béla
Ham Radio callsign: HA5DI

"Amateur Radio: The First Technology-Based Social Network."

Offline Gerrelt

  • Full Member
  • ***
  • Posts: 178
Re: piCore-5.2.1rc2
« Reply #26 on: March 16, 2014, 11:35:35 AM »
Great!  8)

I've now installed piCore 5.2.1rc2 on 4 Raspberries, using three different WiFi adapters. They are all working without problems.

my Raspberry Pi page: http://raspberry.gerrelt.nl