WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: Corepure64 v5.1  (Read 13982 times)

Offline killerhippy

  • WikiUser
  • *
  • Posts: 18
Corepure64 v5.1
« on: January 02, 2014, 05:47:20 PM »
Hi,

I boot corepure64 with syslinux.cfg:
Code: [Select]
label tiny5 core v5.1 64
menu label tiny5 v5.1 64
kernel /tcv5.1-64/vmlinuz64
APPEND initrd=/tcv5.1-64/rootfs64.gz,/tcv5.1-64/modules64.gz text loglevel=3 noswap lst=ontcv5.1-64pure64.lst tce=sda1/tcv5.1-64/tce opt=sda1/tcv5.1-64/tce/opt home=sda1/tcv5.1-64/tce/home

opt and home aren't supported, it says wrong device.

Aside that, it loads successfully textmode.

I have the archive files

corepure64.gz 09d781ee033c614e2372f288b40f026e
modules64.gz 8a3e36c0a3a897264f83d6dd777f4d36
rootfs64.gz 2c3b514a69b7c08b3c71bde2d44f6ee1
vmlinuz64 8ecf26c7eca9fb707cbae57b372c4676

I have used tce-ab to install Xorg v7.7 and I think it was Xlibs to get startx.

startx (is vesa without Intel graphic support, right?) starts blue desktop tc background, I get a mouse X cursor and system freezes.

I installed Intel graphics support (worked immediately at text console), startx freezes also.

I tried to get a log by

Code: [Select]
sh .xsession | tee /mnt/sda1/tcv5.1-64/tce/X.log
This touches the X.log file, but it is empty.

I leave the frozen system by magic sys request  s-u-b, which should emergency sync, umount all, boot. At least it boots.

I have no idea what to do to get more information or how to fix X...
« Last Edit: January 02, 2014, 10:48:50 PM by Juanito »

Offline gerald_clark

  • TinyCore Moderator
  • Hero Member
  • *****
  • Posts: 4254
Re: Corepure64 v5.1
« Reply #1 on: January 02, 2014, 05:58:35 PM »
opt= and home= can only specify the partition.  You cannot specify a directory.  The directories are opt and home.
« Last Edit: January 02, 2014, 10:49:03 PM by Juanito »

Offline Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14096
Re: Corepure64 v5.1
« Reply #2 on: January 02, 2014, 10:47:50 PM »
Since you mention corepure64.gz, I wonder if you have a mixture of extensions from corepure64-4.x and 5.x in your tce folder.

There were significant changes in the x extensions - Xlibs, Xorg-7.7, Xprogs, etc between 4.x and 5.x and I would recommend that you delete or rename your tce folder and download and load the x extensions again under corepure64 5.x
« Last Edit: January 02, 2014, 10:49:22 PM by Juanito »

Offline killerhippy

  • WikiUser
  • *
  • Posts: 18
Re: Corepure64 v5.1
« Reply #3 on: January 03, 2014, 05:16:35 AM »
I moved corepure64.gz to corepure64.gz.old.
I verified that I have files from the release candidate, modules64.gz, rootfs64.gz and vmlinuz64
I removed the tce directory.

Booted up, used tce-ab to install everything I think I need to use X.
X starts, mouse doesn't work.

I fired up a sshd server at tc5.1-64 and this way I could verify, it doesn't freeze, it just doesn't use the mouse.
I use a Logitech Wheelmouse (usb) via ps/2 adaptor (to save usb slots).

My host system says, it uses evdev as input driver for 'ImExPS/2 Logitech Wheel Mouse'
I'll try to find that at tc because tc's Xorg.0.log doesn't show up evdev entries.

Offline Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14096
Re: Corepure64 v5.1
« Reply #4 on: January 03, 2014, 05:43:35 AM »
If the xf86-input-evdev driver is loaded, your mouse should work.

Does your keyboard work?

Offline killerhippy

  • WikiUser
  • *
  • Posts: 18
Re: Corepure64 v5.1
« Reply #5 on: January 03, 2014, 06:04:42 AM »
I expected that, too, unfortunately it doesn't.

I installed xf86-input-evdev, I even rebooted, still no change.
Mouse doesn't move.

Xorg.0.log
Code: [Select]
[   153.048]
X.Org X Server 1.14.4
Release Date: 2013-10-31
[   153.048] X Protocol Version 11, Revision 0
[   153.048] Build Operating System: Linux 3.8.13-tinycore64 x86_64
[   153.048] Current Operating System: Linux box 3.8.13-tinycore64 #777 SMP Fri Oct 18 15:13:45 UTC 2013 x86_64
[   153.048] Kernel command line: initrd=/tcv5.1-64/rootfs64.gz,/tcv5.1-64/modules64.gz text loglevel=3 noswap lst=ontcv5.1-64pure64.lst tce=sda1/tcv5.1-64/tce opt=sda1 home=sda1 BOOT_IMAGE=/tcv5.1-64/vmlinuz64
[   153.048] Build Date: 12 November 2013  04:25:28PM
[   153.048] 
[   153.048] Current version of pixman: 0.30.2
[   153.048]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[   153.048] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   153.049] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan  3 13:27:50 2014
[   153.049] (==) Using system config directory "/usr/local/share/X11/xorg.conf.d"
[   153.050] (==) No Layout section.  Using the first Screen section.
[   153.050] (==) No screen section available. Using defaults.
[   153.050] (**) |-->Screen "Default Screen Section" (0)
[   153.050] (**) |   |-->Monitor "<default monitor>"
[   153.050] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[   153.050] (==) Automatically adding devices
[   153.050] (==) Automatically enabling devices
[   153.050] (==) Automatically adding GPU devices
[   153.050] (WW) The directory "/usr/local/lib/X11/fonts/misc/" does not exist.
[   153.050]    Entry deleted from font path.
[   153.050] (WW) The directory "/usr/local/lib/X11/fonts/TTF/" does not exist.
[   153.050]    Entry deleted from font path.
[   153.050] (WW) The directory "/usr/local/lib/X11/fonts/OTF/" does not exist.
[   153.050]    Entry deleted from font path.
[   153.050] (WW) The directory "/usr/local/lib/X11/fonts/Type1/" does not exist.
[   153.050]    Entry deleted from font path.
[   153.050] (WW) The directory "/usr/local/lib/X11/fonts/100dpi/" does not exist.
[   153.050]    Entry deleted from font path.
[   153.051] (WW) The directory "/usr/local/lib/X11/fonts/75dpi/" does not exist.
[   153.051]    Entry deleted from font path.
[   153.051] (==) FontPath set to:

 [   153.051] (==) ModulePath set to "/usr/local/lib/xorg/modules"
[   153.051] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[   153.051] (II) Loader magic: 0x7a9ce0
[   153.051] (II) Module ABI versions:
[   153.051]    X.Org ANSI C Emulation: 0.4
[   153.051]    X.Org Video Driver: 14.1
[   153.051]    X.Org XInput driver : 19.1
[   153.051]    X.Org Server Extension : 7.0
[   153.052] (II) xfree86: Adding drm device (/dev/dri/card0)
[   153.055] (--) PCI:*(0:0:2:0) 8086:2772:1849:2772 rev 2, Mem @ 0xfea80000/524288, 0xe0000000/268435456, 0xfea40000/262144, I/O @ 0x0000dc00/8
[   153.055] (--) PCI: (0:3:0:0) 109e:036e:0000:0000 rev 2, Mem @ 0xfdffe000/4096
[   153.055] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   153.055] Initializing built-in extension Generic Event Extension
[   153.055] Initializing built-in extension SHAPE
[   153.055] Initializing built-in extension MIT-SHM
[   153.055] Initializing built-in extension XInputExtension
[   153.055] Initializing built-in extension XTEST
[   153.055] Initializing built-in extension BIG-REQUESTS
[   153.055] Initializing built-in extension SYNC
[   153.055] Initializing built-in extension XKEYBOARD
[   153.055] Initializing built-in extension XC-MISC
[   153.055] Initializing built-in extension XINERAMA
[   153.055] Initializing built-in extension XFIXES
[   153.055] Initializing built-in extension RENDER
[   153.055] Initializing built-in extension RANDR
[   153.055] Initializing built-in extension COMPOSITE
[   153.056] Initializing built-in extension DAMAGE
[   153.056] Initializing built-in extension MIT-SCREEN-SAVER
[   153.056] Initializing built-in extension DOUBLE-BUFFER
[   153.056] Initializing built-in extension RECORD
[   153.056] Initializing built-in extension DPMS
[   153.056] Initializing built-in extension X-Resource
[   153.056] Initializing built-in extension XVideo
[   153.056] Initializing built-in extension XVideo-MotionCompensation
[   153.056] Initializing built-in extension XFree86-VidModeExtension
[   153.056] Initializing built-in extension XFree86-DGA
[   153.056] Initializing built-in extension XFree86-DRI
[   153.056] Initializing built-in extension DRI2
[   153.056] (II) "glx" will be loaded by default.
[   153.056] (II) LoadModule: "dri2"
[   153.056] (II) Module "dri2" already built-in
[   153.056] (II) LoadModule: "glamoregl"
[   153.056] (II) Loading /usr/local/lib/xorg/modules/libglamoregl.so
[   153.057] (EE) Failed to load /usr/local/lib/xorg/modules/libglamoregl.so: libEGL.so.1: cannot open shared object file: No such file or directory
  [   153.057] (EE) Failed to load /usr/local/lib/xorg/modules/libglamoregl.so: libEGL.so.1: cannot open shared object file: No such file or directory
[   153.057] (II) UnloadModule: "glamoregl"
[   153.057] (II) Unloading glamoregl
[   153.057] (EE) Failed to load module "glamoregl" (loader failed, 7)
[   153.057] (II) LoadModule: "glx"
[   153.058] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
[   153.068] (II) Module glx: vendor="X.Org Foundation"
[   153.068]    compiled for 1.14.4, module version = 1.0.0
[   153.068]    ABI class: X.Org Server Extension, version 7.0
[   153.068] (==) AIGLX enabled
[   153.068] Loading extension GLX
[   153.068] (==) Matched intel as autoconfigured driver 0
[   153.068] (==) Matched intel as autoconfigured driver 1
[   153.068] (==) Matched vesa as autoconfigured driver 2
[   153.068] (==) Matched modesetting as autoconfigured driver 3
[   153.068] (==) Matched fbdev as autoconfigured driver 4
[   153.068] (==) Assigned the driver to the xf86ConfigLayout
[   153.068] (II) LoadModule: "intel"
[   153.069] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so
[   153.090] (II) Module intel: vendor="X.Org Foundation"
[   153.090]    compiled for 1.14.4, module version = 2.21.15
[   153.090]    Module class: X.Org Video Driver
[   153.090]    ABI class: X.Org Video Driver, version 14.1
[   153.090] (II) LoadModule: "vesa"
[   153.091] (WW) Warning, couldn't open module vesa
[   153.091] (II) UnloadModule: "vesa"
[   153.091] (II) Unloading vesa
[   153.091] (EE) Failed to load module "vesa" (module does not exist, 0)
[   153.091] (II) LoadModule: "modesetting"
[   153.092] (WW) Warning, couldn't open module modesetting
[   153.092] (II) UnloadModule: "modesetting"
[   153.092] (II) Unloading modesetting
[   153.092] (EE) Failed to load module "modesetting" (module does not exist, 0)
[   153.092] (II) LoadModule: "fbdev"
[   153.092] (WW) Warning, couldn't open module fbdev
[   153.092] (II) UnloadModule: "fbdev"
[   153.092] (II) Unloading fbdev
[   153.092] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   153.092] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
        i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
        915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
        Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
        GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
        HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
        HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
        HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
        HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[   153.093] (--) using VT number 2

 [   153.132] (II) intel(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[   153.132] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   153.133] (==) intel(0): RGB weight 888
[   153.133] (==) intel(0): Default visual is TrueColor
[   153.133] (--) intel(0): Integrated Graphics Chipset: Intel(R) 945G
[   153.133] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3
[   153.134] (**) intel(0): Framebuffer tiled
[   153.134] (**) intel(0): Pixmaps tiled
[   153.134] (**) intel(0): "Tear free" disabled
[   153.134] (**) intel(0): Forcing per-crtc-pixmaps? no
[   153.134] (II) intel(0): Output VGA1 has no monitor section
[   153.134] (--) intel(0): Output VGA1 using initial mode 1920x1080 on pipe 0
[   153.134] (==) intel(0): DPI set to (96, 96)
[   153.134] (II) Loading sub module "dri2"
[   153.134] (II) LoadModule: "dri2"
[   153.134] (II) Module "dri2" already built-in
[   153.134] (==) Depth 24 pixmap format is 32 bpp
[   153.147] (II) intel(0): SNA initialized with Alviso (gen3) backend
[   153.147] (==) intel(0): Backing store disabled
[   153.147] (==) intel(0): Silken mouse enabled
[   153.147] (II) intel(0): HW Cursor enabled
[   153.147] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   153.147] (==) intel(0): DPMS enabled
[   153.152] (II) intel(0): [XvMC] i915_xvmc driver initialized.
[   153.152] (II) intel(0): [DRI2] Setup complete
[   153.152] (II) intel(0): [DRI2]   DRI driver: i915
[   153.152] (II) intel(0): direct rendering: DRI2 Enabled
[   153.152] (==) intel(0): hotplug detection: "enabled"
[   153.152] (--) RandR disabled
[   153.175] (EE) AIGLX error: dlopen of /usr/local/lib/dri/i915_dri.so failed (/usr/local/lib/dri/i915_dri.so: cannot open shared object file: No such file or directory)
[   153.175] (EE) AIGLX: reverting to software rendering
[   153.175] (II) AIGLX: Screen 0 is not DRI capable
[   153.175] (EE) AIGLX error: dlopen of /usr/local/lib/dri/swrast_dri.so failed (/usr/local/lib/dri/swrast_dri.so: cannot open shared object file: No such file or directory)
    [   153.175] (EE) GLX: could not load software renderer
[   153.175] (II) GLX: no usable GL providers found for screen 0
[   153.193] (II) intel(0): switch to mode 1920x1080@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal
[   153.206] (II) intel(0): Setting screen physical size to 508 x 285
[   153.339] (II) config/udev: Adding drm device (/dev/dri/card0)
[   153.366] 6 XSELINUXs still allocated at reset
[   153.366] SCREEN: 0 objects of 256 bytes = 0 total bytes 0 private allocs
[   153.366] DEVICE: 0 objects of 96 bytes = 0 total bytes 0 private allocs
[   153.366] CLIENT: 0 objects of 192 bytes = 0 total bytes 0 private allocs
[   153.366] WINDOW: 0 objects of 72 bytes = 0 total bytes 0 private allocs
[   153.366] PIXMAP: 1 objects of 48 bytes = 48 total bytes 0 private allocs
[   153.366] GC: 4 objects of 88 bytes = 352 total bytes 0 private allocs
[   153.366] CURSOR: 1 objects of 8 bytes = 8 total bytes 0 private allocs
[   153.366] DBE_WINDOW: 0 objects of 24 bytes = 0 total bytes 0 private allocs
[   153.366] GLYPH: 0 objects of 24 bytes = 0 total bytes 0 private allocs
[   153.366] TOTAL: 6 objects, 408 bytes, 0 allocs
[   153.366] 1 PIXMAPs still allocated at reset
[   153.366] PIXMAP: 1 objects of 48 bytes = 48 total bytes 0 private allocs
[   153.366] GC: 4 objects of 88 bytes = 352 total bytes 0 private allocs
[   153.366] CURSOR: 1 objects of 8 bytes = 8 total bytes 0 private allocs
[   153.366] DBE_WINDOW: 0 objects of 24 bytes = 0 total bytes 0 private allocs
[   153.366] GLYPH: 0 objects of 24 bytes = 0 total bytes 0 private allocs
[   153.366] TOTAL: 6 objects, 408 bytes, 0 allocs
[   153.366] 4 GCs still allocated at reset
[   153.366] GC: 4 objects of 88 bytes = 352 total bytes 0 private allocs
[   153.366] CURSOR: 1 objects of 8 bytes = 8 total bytes 0 private allocs
[   153.366] DBE_WINDOW: 0 objects of 24 bytes = 0 total bytes 0 private allocs
[   153.366] GLYPH: 0 objects of 24 bytes = 0 total bytes 0 private allocs
[   153.366] TOTAL: 5 objects, 360 bytes, 0 allocs
[   153.366] 1 CURSORs still allocated at reset
[   153.367] CURSOR: 1 objects of 8 bytes = 8 total bytes 0 private allocs
[   153.367] DBE_WINDOW: 0 objects of 24 bytes = 0 total bytes 0 private allocs
[   153.367] GLYPH: 0 objects of 24 bytes = 0 total bytes 0 private allocs
[   153.367] TOTAL: 1 objects, 8 bytes, 0 allocs
[   153.367] 1 CURSOR_BITSs still allocated at reset
[   153.367] DBE_WINDOW: 0 objects of 24 bytes = 0 total bytes 0 private allocs
[   153.367] GLYPH: 0 objects of 24 bytes = 0 total bytes 0 private allocs
[   153.367] TOTAL: 0 objects, 0 bytes, 0 allocs
[   153.370] (II) intel(0): SNA initialized with Alviso (gen3) backend
[   153.371] (II) intel(0): HW Cursor enabled
[   153.371] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   153.371] (==) intel(0): DPMS enabled
[   153.371] (II) intel(0): [XvMC] i915_xvmc driver initialized.
[   153.371] (II) intel(0): [DRI2] Setup complete
[   153.371] (II) intel(0): [DRI2]   DRI driver: i915
[   153.371] (II) intel(0): direct rendering: DRI2 Enabled
[   153.371] (==) intel(0): hotplug detection: "enabled"
[   153.371] (--) RandR disabled
[   153.395] (EE) AIGLX error: dlopen of /usr/local/lib/dri/i915_dri.so failed (/usr/local/lib/dri/i915_dri.so: cannot open shared object file: No such file or directory)
[   153.395] (EE) AIGLX: reverting to software rendering
[   153.395] (II) AIGLX: Screen 0 is not DRI capable
[   153.396] (EE) AIGLX error: dlopen of /usr/local/lib/dri/swrast_dri.so failed (/usr/local/lib/dri/swrast_dri.so: cannot open shared object file: No such file or directory)
[   153.396] (EE) GLX: could not load software renderer
[   153.396] (II) GLX: no usable GL providers found for screen 0
[   153.397] (II) intel(0): switch to mode 1920x1080@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal
[   153.426] (II) intel(0): Setting screen physical size to 508 x 285
[   153.522] (II) config/udev: Adding drm device (/dev/dri/card0)

Xorg-server refuses to load keyboard, mouse and evdev modules which I do have installed:
xf86-input-evdev.tcz,  xf86-input-keyboard.tcz  and xf86-input-mouse.tcz

If of interest, I also have a dmesg output available.

Offline Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14096
Re: Corepure64 v5.1
« Reply #6 on: January 03, 2014, 06:40:57 AM »
How did you download the extensions?

Xorg-7.7.tcz.dep has Xorg-fonts, xf86-video-vesa and xf86-video-fbdev, but as per your Xorg log, these are not loaded.

xf86-video-intel.tcz.dep has graphics-KERNEL and glamor-egl, but these do not appear to be loaded either.
« Last Edit: January 03, 2014, 06:50:44 AM by Juanito »

Offline Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14096
Re: Corepure64 v5.1
« Reply #7 on: January 03, 2014, 06:55:09 AM »
Note that if you want Xorg to use xf86-input-mouse and xf86-input-keyboard rather than xf86-input-evdev, you need to create an /etc/X11/xorg.conf with this in it:
Code: [Select]
Section "ServerFlags"
Option "AutoAddDevices" "false"
EndSection

..however, I think a lack of fonts is the problem at the moment

Offline killerhippy

  • WikiUser
  • *
  • Posts: 18
Re: Corepure64 v5.1
« Reply #8 on: January 03, 2014, 07:25:11 AM »
I use tce-ab to (s)earch or look which (p)rovides keywords to find packages. If found, I (i)nstall it, this also cares for dependencies.
What about dependencies of dependencies? I think I looked for  xorg-3d as initial point to get xorg-server installed.

I have a lot at optional/,  libXfont.tcz* is there, too.

My ontcv5.1-64pure64.lst looks like this:
Code: [Select]
xorg-server.tcz
wbar.tcz
Xlibs.tcz
Xprogs.tcz
graphics-3.8.13-tinycore64.tcz
flwm.tcz
xf86-video-intel.tcz
xf86-input-keyboard.tcz
xkeyboard-config.tcz
xf86-input-mouse.tcz
Xorg-7.7-bin.tcz
libxkbfile.tcz
openssh.tcz
xf86-input-evdev.tcz

I don't know why Xorg-fonts aren't loaded but, xf86-video-vesa and xf86-video-fbdev are not yet installed.


BTW: I don't want xf86-input-mouse and xf86-input-keyboard, I just intalled those to see, if it runs X with these.

Meanwhile I gave it try with this xorg.conf:
Code: [Select]
Section "InputClass"
        Identifier "german keyboard"
        Driver "evdev"
        MatchIsKeyboard "on"
        Option "xkbmodel" "evdev"
        Option "xkblayout" "de"
        Option "xkbvariant" "deadgraveacute"
        Option "xkbrules" "base"
        Option "xkboptions" "compose:menu,terminate:ctrl_alt_bksp"
EndSection

Section "InputDevice"
        Identifier "mouse"
        Driver "evdev"
        Option "Device"   "/dev/input/mice"
        Option "CorePointer"
EndSection

Section "ServerFlags"
        Option "DontZap" "false"
EndSection
...no luck neither, mouse doesn't move. - BTW: How should I test keybord without open windows?

look at "grep mouse /var/log/Xorg.0.log":
Code: [Select]
[   225.990] (==) |-->Input Device "mouse"
[   226.089] (==) intel(0): Silken mouse enabled
[   226.282] (II) Using input driver 'evdev' for 'mouse'
[   226.282] (**) mouse: always reports core events
[   226.282] (**) evdev: mouse: Device: "/dev/input/mice"
[   226.282] (EE) evdev: mouse: ioctl EVIOCGBIT for bitmask in EvdevOpenMTDev failed: Inappropriate ioctl for device
[   226.282] (EE) mouse: Couldn't open mtdev device
[   226.320] (EE) PreInit returned 2 for "mouse"
[   226.508] (II) Using input driver 'evdev' for 'mouse'
[   226.508] (**) mouse: always reports core events
[   226.508] (**) evdev: mouse: Device: "/dev/input/mice"
[   226.508] (EE) evdev: mouse: ioctl EVIOCGBIT for bitmask in EvdevOpenMTDev failed: Inappropriate ioctl for device
[   226.508] (EE) mouse: Couldn't open mtdev device
[   226.563] (EE) PreInit returned 2 for "mouse"

I'll give it another shot with installing xf86-video-vesa and xf86-video-fbdev...


Offline Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14096
Re: Corepure64 v5.1
« Reply #9 on: January 03, 2014, 07:36:38 AM »
What about dependencies of dependencies?
..they should be downloaded and loaded automatically.

Quote
I have a lot at optional/,  libXfont.tcz* is there, too.
OK, but is Xorg-fonts loaded? Try "tce-load -i Xorg-fonts" to check

Quote
Meanwhile I gave it try with this xorg.conf:
For trouble-shooting purposes it would be better to delete xorg.conf and try "confless"

Quote
I'll give it another shot with installing xf86-video-vesa and xf86-video-fbdev...
If you have intel hardware and xf86-video-intel is loaded, these are not required - however if you used tce-load to download and load Xorg-7.7-3d then these should have been downloaded and loaded automatically.

Offline killerhippy

  • WikiUser
  • *
  • Posts: 18
Re: Corepure64 v5.1
« Reply #10 on: January 03, 2014, 08:04:56 AM »
Xorg-fonts was not installed.
Installing it helped xorg-server finding fonts.
modules vesa and fbdev the same.

No luck with mouse, still I don't know how to check keyboard at X if mouse doesn't work
FYI: TCE runs at the host I am using right now (gentoo linux) and it starts from booting the host and choosing to boot from cfcard.

The more I try the less I a look forward.
I'll erase everything from tce and give it a fresh start, like http://distro.ibiblio.org/tinycorelinux/4.x/armv6/README.txt says, I start at Step 5

Offline gerald_clark

  • TinyCore Moderator
  • Hero Member
  • *****
  • Posts: 4254
Re: Corepure64 v5.1
« Reply #11 on: January 03, 2014, 08:09:58 AM »
Why are you reading ARM instructions when you are running X86_64?

Offline Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14096
Re: Corepure64 v5.1
« Reply #12 on: January 03, 2014, 08:21:50 AM »
Only four or five days ago I updated the family server from tc-4.7.7 (core64) to corepure64 5.1

I started with an empty tce folder, downloaded extensions using "tce-load -w Xorg-7.7-3d", etc, installed them with "tce-load -i "Xorg-7.7-3d", etc and everything worked as expected...

Offline killerhippy

  • WikiUser
  • *
  • Posts: 18
Re: Corepure64 v5.1
« Reply #13 on: January 03, 2014, 08:48:36 AM »
Quote
Why are you reading ARM instructions when you are running X86_64?
I don't. I just use the recipe for installing X from Step 5 downwards.

Juanito, I did as the recipe told me, except that I used Xorg version 7.7.

Everything worked fine as before.
After reboot, typing startx leads to the same situation at my computer. It starts X, the desktop looks fine, the mouse does not move. Keyboard lights are off and do not react even if I press Nunlock.

FYI: If I do "sudo cat /dev/input/mice" and move my mouse at the console, I get garbage as expected for a working device. The mouse has no ball but a led and it is shining dark and brights up when moving...

Here I have the new Xorg.0.log part-one from the situation after using the recipe, booting, startx:
Code: [Select]
[   112.171]
X.Org X Server 1.14.4
Release Date: 2013-10-31
[   112.171] X Protocol Version 11, Revision 0
[   112.171] Build Operating System: Linux 3.8.13-tinycore64 x86_64
[   112.171] Current Operating System: Linux box 3.8.13-tinycore64 #777 SMP Fri Oct 18 15:13:45 UTC 2013 x86_64
[   112.171] Kernel command line: initrd=/tcv5.1-64/rootfs64.gz,/tcv5.1-64/modules64.gz text loglevel=3 noswap lst=ontcv5.1-64pure64.lst tce=sda1/tcv5.1-64/tce BOOT_IMAGE=/tcv5.1-64/vmlinuz64
[   112.171] Build Date: 12 November 2013  04:25:28PM
[   112.171] 
[   112.171] Current version of pixman: 0.30.2
[   112.171]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[   112.171] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   112.172] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan  3 16:19:26 2014
[   112.172] (==) Using system config directory "/usr/local/share/X11/xorg.conf.d"
[   112.172] (==) No Layout section.  Using the first Screen section.
[   112.172] (==) No screen section available. Using defaults.
[   112.172] (**) |-->Screen "Default Screen Section" (0)
[   112.172] (**) |   |-->Monitor "<default monitor>"
[   112.173] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[   112.173] (==) Automatically adding devices
[   112.173] (==) Automatically enabling devices
[   112.173] (==) Automatically adding GPU devices
[   112.173] (WW) The directory "/usr/local/lib/X11/fonts/OTF/" does not exist.
[   112.173]    Entry deleted from font path.
[   112.173] (WW) The directory "/usr/local/lib/X11/fonts/100dpi/" does not exist.
[   112.173]    Entry deleted from font path.
[   112.173] (==) FontPath set to:
        /usr/local/lib/X11/fonts/misc/,
        /usr/local/lib/X11/fonts/TTF/,
        /usr/local/lib/X11/fonts/Type1/,
        /usr/local/lib/X11/fonts/75dpi/
[   112.173] (==) ModulePath set to "/usr/local/lib/xorg/modules"
[   112.173] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[   112.173] (II) Loader magic: 0x7a9ce0
[   112.173] (II) Module ABI versions:
[   112.173]    X.Org ANSI C Emulation: 0.4
[   112.173]    X.Org Video Driver: 14.1
[   112.173]    X.Org XInput driver : 19.1
[   112.173]    X.Org Server Extension : 7.0
[   112.176] (--) PCI:*(0:0:2:0) 8086:2772:1849:2772 rev 2, Mem @ 0xfea80000/524288, 0xe0000000/268435456, 0xfea40000/262144, I/O @ 0x0000dc00/8
[   112.176] (--) PCI: (0:3:0:0) 109e:036e:0000:0000 rev 2, Mem @ 0xfdffe000/4096
[   112.177] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   112.177] Initializing built-in extension Generic Event Extension
[   112.177] Initializing built-in extension SHAPE
[   112.177] Initializing built-in extension MIT-SHM
[   112.177] Initializing built-in extension XInputExtension
[   112.177] Initializing built-in extension XTEST
[   112.177] Initializing built-in extension BIG-REQUESTS
[   112.177] Initializing built-in extension SYNC
[   112.177] Initializing built-in extension XKEYBOARD
[   112.177] Initializing built-in extension XC-MISC
[   112.177] Initializing built-in extension XINERAMA
[   112.177] Initializing built-in extension XFIXES
[   112.177] Initializing built-in extension RENDER
[   112.177] Initializing built-in extension RANDR
[   112.177] Initializing built-in extension COMPOSITE
[   112.177] Initializing built-in extension DAMAGE
[   112.177] Initializing built-in extension MIT-SCREEN-SAVER
[   112.177] Initializing built-in extension DOUBLE-BUFFER
[   112.177] Initializing built-in extension RECORD
[   112.177] Initializing built-in extension DPMS
[   112.177] Initializing built-in extension X-Resource
[   112.177] Initializing built-in extension XVideo
[   112.177] Initializing built-in extension XVideo-MotionCompensation
[   112.177] Initializing built-in extension XFree86-VidModeExtension
[   112.177] Initializing built-in extension XFree86-DGA
[   112.177] Initializing built-in extension XFree86-DRI
[   112.177] Initializing built-in extension DRI2
[   112.177] (II) LoadModule: "glx"
[   112.178] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
[   112.188] (II) Module glx: vendor="X.Org Foundation"
[   112.189]    compiled for 1.14.4, module version = 1.0.0
[   112.189]    ABI class: X.Org Server Extension, version 7.0
[   112.189] (==) AIGLX enabled
[   112.189] Loading extension GLX
[   112.189] (==) Matched intel as autoconfigured driver 0
[   112.189] (==) Matched vesa as autoconfigured driver 1
[   112.189] (==) Matched modesetting as autoconfigured driver 2
[   112.189] (==) Matched fbdev as autoconfigured driver 3
[   112.189] (==) Assigned the driver to the xf86ConfigLayout
[   112.189] (II) LoadModule: "intel"
[   112.190] (WW) Warning, couldn't open module intel
[   112.190] (II) UnloadModule: "intel"
[   112.190] (II) Unloading intel
[   112.190] (EE) Failed to load module "intel" (module does not exist, 0)
[   112.190] (II) LoadModule: "vesa"
[   112.190] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so
[   112.191] (II) Module vesa: vendor="X.Org Foundation"
[   112.191]    compiled for 1.14.3, module version = 2.3.3
[   112.191]    Module class: X.Org Video Driver
[   112.191]    ABI class: X.Org Video Driver, version 14.1
[   112.191] (II) LoadModule: "modesetting"
[   112.192] (WW) Warning, couldn't open module modesetting
[   112.192] (II) UnloadModule: "modesetting"
[   112.192] (II) Unloading modesetting
[   112.192] (EE) Failed to load module "modesetting" (module does not exist, 0)
[   112.192] (II) LoadModule: "fbdev"
[   112.192] (II) Loading /usr/local/lib/xorg/modules/drivers/fbdev_drv.so
[   112.193] (II) Module fbdev: vendor="X.Org Foundation"
[   112.193]    compiled for 1.14.3, module version = 0.4.4
[   112.193]    Module class: X.Org Video Driver
[   112.193]    ABI class: X.Org Video Driver, version 14.1
[   112.193] (II) VESA: driver for VESA chipsets: vesa
[   112.193] (II) FBDEV: driver for framebuffer: fbdev
[   112.193] (--) using VT number 2

[   112.198] (WW) Falling back to old probe method for fbdev
[   112.198] (II) Loading sub module "fbdevhw"
[   112.198] (II) LoadModule: "fbdevhw"
[   112.199] (II) Loading /usr/local/lib/xorg/modules/libfbdevhw.so
[   112.200] (II) Module fbdevhw: vendor="X.Org Foundation"
[   112.200]    compiled for 1.14.4, module version = 0.0.2
[   112.200]    ABI class: X.Org Video Driver, version 14.1
[   112.209] (EE) open /dev/fb0: No such device
[   112.209] (II) Loading sub module "vbe"
[   112.209] (II) LoadModule: "vbe"
[   112.210] (II) Loading /usr/local/lib/xorg/modules/libvbe.so
[   112.213] (II) Module vbe: vendor="X.Org Foundation"
[   112.213]    compiled for 1.14.4, module version = 1.1.0
[   112.213]    ABI class: X.Org Video Driver, version 14.1
[   112.213] (II) Loading sub module "int10"
[   112.213] (II) LoadModule: "int10"
[   112.214] (II) Loading /usr/local/lib/xorg/modules/libint10.so
[   112.218] (II) Module int10: vendor="X.Org Foundation"
[   112.218]    compiled for 1.14.4, module version = 1.0.0
[   112.218]    ABI class: X.Org Video Driver, version 14.1
[   112.218] (II) VESA(0): initializing int10
[   112.226] (II) VESA(0): Bad V_BIOS checksum
[   112.226] (II) VESA(0): Primary V_BIOS segment is: 0xc000
[   112.227] (II) VESA(0): VESA BIOS detected
[   112.227] (II) VESA(0): VESA VBE Version 3.0
[   112.227] (II) VESA(0): VESA VBE Total Mem: 7872 kB
[   112.227] (II) VESA(0): VESA VBE OEM: Intel(r) 82945G Chipset Family Graphics Chip Accelerated VGA BIOS
[   112.227] (II) VESA(0): VESA VBE OEM Software Rev: 1.0
[   112.227] (II) VESA(0): VESA VBE OEM Vendor: Intel Corporation
[   112.227] (II) VESA(0): VESA VBE OEM Product: Intel(r) 82945G Chipset Family Graphics Controller
[   112.227] (II) VESA(0): VESA VBE OEM Product Rev: Hardware Version 0.0
[   112.294] (II) VESA(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[   112.294] (==) VESA(0): Depth 24, (--) framebuffer bpp 32
[   112.294] (==) VESA(0): RGB weight 888
[   112.294] (==) VESA(0): Default visual is TrueColor
[   112.294] (==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
[   112.294] (II) Loading sub module "ddc"
[   112.294] (II) LoadModule: "ddc"
[   112.294] (II) Module "ddc" already built-in
[   112.296] (II) VESA(0): VESA VBE DDC supported
[   112.296] (II) VESA(0): VESA VBE DDC Level 2
[   112.296] (II) VESA(0): VESA VBE DDC transfer in appr. 1 sec.
[   112.309] (II) VESA(0): VESA VBE DDC read successfully
[   112.309] (II) VESA(0): Manufacturer: BNQ  Model: 7874  Serial#: 21573
[   112.309] (II) VESA(0): Year: 2010  Week: 42
[   112.309] (II) VESA(0): EDID Version: 1.3
[   112.309] (II) VESA(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[   112.309] (II) VESA(0): Sync:  Separate  Composite  SyncOnGreen
[   112.309] (II) VESA(0): Max Image Size [cm]: horiz.: 48  vert.: 27
[   112.309] (II) VESA(0): Gamma: 2.20
[   112.309] (II) VESA(0): DPMS capabilities: Off; RGB/Color Display
[   112.309] (II) VESA(0): Default color space is primary color space
[   112.309] (II) VESA(0): First detailed timing is preferred mode
[   112.309] (II) VESA(0): redX: 0.637 redY: 0.349   greenX: 0.333 greenY: 0.605
[   112.309] (II) VESA(0): blueX: 0.148 blueY: 0.061   whiteX: 0.312 whiteY: 0.329
[   112.309] (II) VESA(0): Supported established timings:
[   112.309] (II) VESA(0): 720x400@70Hz

Offline killerhippy

  • WikiUser
  • *
  • Posts: 18
Re: Corepure64 v5.1
« Reply #14 on: January 03, 2014, 08:49:14 AM »
part-two
Code: [Select]
[   112.309] (II) VESA(0): 640x480@60Hz
[   112.309] (II) VESA(0): 640x480@75Hz
[   112.309] (II) VESA(0): 800x600@60Hz
[   112.309] (II) VESA(0): 800x600@75Hz
[   112.309] (II) VESA(0): 832x624@75Hz
[   112.309] (II) VESA(0): 1024x768@60Hz
[   112.309] (II) VESA(0): 1024x768@75Hz
[   112.309] (II) VESA(0): 1280x1024@75Hz
[   112.309] (II) VESA(0): 1152x864@75Hz
[   112.309] (II) VESA(0): Manufacturer's mask: 0
[   112.309] (II) VESA(0): Supported standard timings:
[   112.309] (II) VESA(0): #0: hsize: 1024  vsize 576  refresh: 60  vid: 49249
[   112.309] (II) VESA(0): #1: hsize: 1280  vsize 800  refresh: 60  vid: 129
[   112.309] (II) VESA(0): #2: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[   112.309] (II) VESA(0): #3: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[   112.310] (II) VESA(0): #4: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[   112.310] (II) VESA(0): #5: hsize: 1600  vsize 900  refresh: 60  vid: 49321
[   112.310] (II) VESA(0): #6: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[   112.310] (II) VESA(0): #7: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[   112.310] (II) VESA(0): Supported detailed timing:
[   112.310] (II) VESA(0): clock: 148.5 MHz   Image Size:  477 x 268 mm
[   112.310] (II) VESA(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[   112.310] (II) VESA(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[   112.310] (II) VESA(0): Serial No: BAA07143SL0
[   112.310] (II) VESA(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 215 MHz
[   112.310] (II) VESA(0): Monitor name: BenQ GL2230
[   112.310] (II) VESA(0): EDID (in hex):
[   112.310] (II) VESA(0):      00ffffffffffff0009d1747845540000
[   112.310] (II) VESA(0):      2a1401030e301b782e1421a359559b26
[   112.310] (II) VESA(0):      0f5054a56b8061c0810081c081408180
[   112.310] (II) VESA(0):      a9c0b300d1c0023a801871382d40582c
[   112.310] (II) VESA(0):      4500dd0c1100001e000000ff00424141
[   112.310] (II) VESA(0):      3037313433534c300a20000000fd0032
[   112.310] (II) VESA(0):      4c1e5315000a202020202020000000fc
[   112.310] (II) VESA(0):      0042656e5120474c323233300a200033
[   112.310] (II) VESA(0): EDID vendor "BNQ", prod id 30836
[   112.310] (II) VESA(0): Using EDID range info for horizontal sync
[   112.310] (II) VESA(0): Using EDID range info for vertical refresh
[   112.310] (II) VESA(0): Printing DDC gathered Modelines:
[   112.310] (II) VESA(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[   112.310] (II) VESA(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   112.310] (II) VESA(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   112.310] (II) VESA(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   112.310] (II) VESA(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   112.311] (II) VESA(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   112.311] (II) VESA(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   112.311] (II) VESA(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   112.311] (II) VESA(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[   112.311] (II) VESA(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   112.311] (II) VESA(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   112.311] (II) VESA(0): Modeline "1024x576"x60.0   46.99  1024 1064 1168 1312  576 577 580 597 -hsync +vsync (35.8 kHz e)
[   112.311] (II) VESA(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz e)
[   112.311] (II) VESA(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz e)
[   112.311] (II) VESA(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[   112.311] (II) VESA(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   112.311] (II) VESA(0): Modeline "1600x900"x60.0  119.00  1600 1696 1864 2128  900 901 904 932 -hsync +vsync (55.9 kHz e)
[   112.311] (II) VESA(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[   112.311] (II) VESA(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[   112.311] (II) VESA(0): Searching for matching VESA mode(s):
... a lot of them...
[   112.397]
[   112.397] (II) VESA(0): Total Memory: 123 64KB banks (7872kB)
[   112.397] (II) VESA(0): <default monitor>: Using hsync range of 30.00-83.00 kHz
[   112.397] (II) VESA(0): <default monitor>: Using vrefresh range of 50.00-76.00 Hz
[   112.397] (II) VESA(0): <default monitor>: Using maximum pixel clock of 215.00 MHz
[   112.397] (WW) VESA(0): Unable to estimate virtual size
[   112.397] (II) VESA(0): Not using built-in mode "1600x1200" (no mode of this name)
[   112.407] (II) VESA(0): Not using built-in mode "1440x900" (no mode of this name)
[   112.416] (II) VESA(0): Not using built-in mode "960x600" (no mode of this name)
[   112.421] (--) VESA(0): Virtual size is 1680x1050 (pitch 1680)
[   112.421] (**) VESA(0): *Built-in mode "1680x1050"
[   112.421] (**) VESA(0): *Built-in mode "1280x1024"
[   112.421] (**) VESA(0): *Built-in mode "1024x768"
[   112.421] (**) VESA(0): *Built-in mode "800x600"
[   112.421] (**) VESA(0): *Built-in mode "640x480"
[   112.421] (**) VESA(0): Display dimensions: (480, 270) mm
[   112.421] (**) VESA(0): DPI set to (88, 98)
[   112.421] (**) VESA(0): Using "Shadow Framebuffer"
[   112.421] (II) Loading sub module "shadow"
[   112.421] (II) LoadModule: "shadow"
[   112.422] (II) Loading /usr/local/lib/xorg/modules/libshadow.so
[   112.422] (II) Module shadow: vendor="X.Org Foundation"
[   112.422]    compiled for 1.14.4, module version = 1.1.0
[   112.422]    ABI class: X.Org ANSI C Emulation, version 0.4
[   112.422] (II) Loading sub module "fb"
[   112.422] (II) LoadModule: "fb"
[   112.423] (II) Loading /usr/local/lib/xorg/modules/libfb.so
[   112.429] (II) Module fb: vendor="X.Org Foundation"
[   112.429]    compiled for 1.14.4, module version = 1.0.0
[   112.429]    ABI class: X.Org ANSI C Emulation, version 0.4
[   112.429] (II) UnloadModule: "fbdev"
[   112.429] (II) Unloading fbdev
[   112.429] (II) UnloadSubModule: "fbdevhw"
[   112.429] (II) Unloading fbdevhw
[   112.429] (==) Depth 24 pixmap format is 32 bpp
[   112.429] (II) Loading sub module "int10"
[   112.429] (II) LoadModule: "int10"
[   112.430] (II) Loading /usr/local/lib/xorg/modules/libint10.so
[   112.430] (II) Module int10: vendor="X.Org Foundation"
[   112.430]    compiled for 1.14.4, module version = 1.0.0
[   112.430]    ABI class: X.Org Video Driver, version 14.1
[   112.430] (II) VESA(0): initializing int10
[   112.436] (II) VESA(0): Bad V_BIOS checksum
[   112.436] (II) VESA(0): Primary V_BIOS segment is: 0xc000
[   112.437] (II) VESA(0): VESA BIOS detected
[   112.437] (II) VESA(0): VESA VBE Version 3.0
[   112.437] (II) VESA(0): VESA VBE Total Mem: 7872 kB
[   112.437] (II) VESA(0): VESA VBE OEM: Intel(r) 82945G Chipset Family Graphics Chip Accelerated VGA BIOS
[   112.437] (II) VESA(0): VESA VBE OEM Software Rev: 1.0
[   112.437] (II) VESA(0): VESA VBE OEM Vendor: Intel Corporation
[   112.437] (II) VESA(0): VESA VBE OEM Product: Intel(r) 82945G Chipset Family Graphics Controller
[   112.437] (II) VESA(0): VESA VBE OEM Product Rev: Hardware Version 0.0
[   112.437] (II) VESA(0): virtual address = 0x7fee355e1000,
        physical address = 0xe0000000, size = 8060928
[   112.474] (II) VESA(0): Setting up VESA Mode 0x168 (1680x1050)
[   112.536] (==) VESA(0): Default visual is TrueColor
[   112.545] (==) VESA(0): Backing store disabled
[   112.546] (==) VESA(0): DPMS enabled
[   112.546] (==) RandR enabled
[   112.568] (II) AIGLX: Screen 0 is not DRI2 capable
[   112.568] (II) AIGLX: Screen 0 is not DRI capable
[   112.568] (EE) AIGLX error: dlopen of /usr/local/lib/dri/swrast_dri.so failed (/usr/local/lib/dri/swrast_dri.so: cannot open shared object file: No such file or directory)
[   112.568] (EE) GLX: could not load software renderer
[   112.568] (II) GLX: no usable GL providers found for screen 0
[   112.867] 7 XSELINUXs still allocated at reset
[   112.867] SCREEN: 0 objects of 320 bytes = 0 total bytes 0 private allocs
[   112.867] COLORMAP: 0 objects of 8 bytes = 0 total bytes 0 private allocs
[   112.867] DEVICE: 0 objects of 96 bytes = 0 total bytes 0 private allocs
[   112.867] CLIENT: 0 objects of 176 bytes = 0 total bytes 0 private allocs
[   112.867] WINDOW: 0 objects of 40 bytes = 0 total bytes 0 private allocs
[   112.867] PIXMAP: 2 objects of 16 bytes = 32 total bytes 0 private allocs
[   112.867] GC: 4 objects of 16 bytes = 64 total bytes 0 private allocs
[   112.867] CURSOR: 1 objects of 8 bytes = 8 total bytes 0 private allocs
[   112.867] DBE_WINDOW: 0 objects of 24 bytes = 0 total bytes 0 private allocs
[   112.867] TOTAL: 7 objects, 104 bytes, 0 allocs
[   112.867] 2 PIXMAPs still allocated at reset
[   112.867] PIXMAP: 2 objects of 16 bytes = 32 total bytes 0 private allocs
[   112.867] CURSOR: 1 objects of 8 bytes = 8 total bytes 0 private allocs
[   112.867] DBE_WINDOW: 0 objects of 24 bytes = 0 total bytes 0 private allocs
[   112.867] TOTAL: 7 objects, 104 bytes, 0 allocs
[   112.867] 4 GCs still allocated at reset
[   112.867] GC: 4 objects of 16 bytes = 64 total bytes 0 private allocs
[   112.867] CURSOR: 1 objects of 8 bytes = 8 total bytes 0 private allocs
[   112.867] DBE_WINDOW: 0 objects of 24 bytes = 0 total bytes 0 private allocs
[   112.867] TOTAL: 5 objects, 72 bytes, 0 allocs
[   112.867] 1 CURSORs still allocated at reset
[   112.867] CURSOR: 1 objects of 8 bytes = 8 total bytes 0 private allocs
[   112.867] DBE_WINDOW: 0 objects of 24 bytes = 0 total bytes 0 private allocs
[   112.867] TOTAL: 1 objects, 8 bytes, 0 allocs
[   112.867] 1 CURSOR_BITSs still allocated at reset
[   112.867] DBE_WINDOW: 0 objects of 24 bytes = 0 total bytes 0 private allocs
[   112.867] TOTAL: 0 objects, 0 bytes, 0 allocs
[   112.870] (II) Loading sub module "int10"
[   112.870] (II) LoadModule: "int10"
[   112.870] (II) Loading /usr/local/lib/xorg/modules/libint10.so
[   112.870] (II) Module int10: vendor="X.Org Foundation"
[   112.870]    compiled for 1.14.4, module version = 1.0.0
[   112.870]    ABI class: X.Org Video Driver, version 14.1
[   112.870] (II) VESA(0): initializing int10
[   112.876] (II) VESA(0): Bad V_BIOS checksum
[   112.876] (II) VESA(0): Primary V_BIOS segment is: 0xc000
[   112.877] (II) VESA(0): VESA BIOS detected
[   112.877] (II) VESA(0): VESA VBE Version 3.0
[   112.877] (II) VESA(0): VESA VBE Total Mem: 7872 kB
[   112.877] (II) VESA(0): VESA VBE OEM: Intel(r) 82945G Chipset Family Graphics Chip Accelerated VGA BIOS
[   112.877] (II) VESA(0): VESA VBE OEM Software Rev: 1.0
[   112.877] (II) VESA(0): VESA VBE OEM Vendor: Intel Corporation
[   112.877] (II) VESA(0): VESA VBE OEM Product: Intel(r) 82945G Chipset Family Graphics Controller
[   112.877] (II) VESA(0): VESA VBE OEM Product Rev: Hardware Version 0.0
[   112.877] (II) VESA(0): virtual address = 0x7fee355e1000,
        physical address = 0xe0000000, size = 8060928
[   112.894] (II) VESA(0): Setting up VESA Mode 0x168 (1680x1050)
[   112.956] (==) VESA(0): Default visual is TrueColor
[   112.957] (==) VESA(0): DPMS enabled
[   112.957] (==) RandR enabled
[   112.979] (II) AIGLX: Screen 0 is not DRI2 capable
[   112.979] (II) AIGLX: Screen 0 is not DRI capable
[   112.979] (EE) AIGLX error: dlopen of /usr/local/lib/dri/swrast_dri.so failed (/usr/local/lib/dri/swrast_dri.so: cannot open shared object file: No such file or directory)
[   112.979] (EE) GLX: could not load software renderer
[   112.979] (II) GLX: no usable GL providers found for screen 0