WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: Wanted a servoblaster.ko in repo  (Read 3630 times)

Offline cattail

  • Newbie
  • *
  • Posts: 16
Wanted a servoblaster.ko in repo
« on: August 05, 2013, 11:45:26 PM »
Hi bmarkus

  I have used picore for a while, And I want try my servo with wiringpi, and find servoblaster (ko) is a better way. (It will drive 8 servos.)
 
Now I wanted to enable servoblaster  support. Can you compile it in kernel tree or send a servoblaster.tcz something in repo?

Cheers,
cattail

Offline bmarkus

  • Administrator
  • Hero Member
  • *****
  • Posts: 7183
    • My Community Forum
Re: Wanted a servoblaster.ko in repo
« Reply #1 on: August 06, 2013, 04:29:20 AM »
I do not know servoblaster. DO you have a reference to it?
Béla
Ham Radio callsign: HA5DI

"Amateur Radio: The First Technology-Based Social Network."

Offline bmarkus

  • Administrator
  • Hero Member
  • *****
  • Posts: 7183
    • My Community Forum
Re: Wanted a servoblaster.ko in repo
« Reply #2 on: August 06, 2013, 07:36:21 AM »
I found it:

https://github.com/richardghirst/PiBits/tree/master/ServoBlaster

Unfortunately I'm limited in resorces so I can't build it and no hw to test. However you can do it yourself and can try the user space version which is easier to build.
Béla
Ham Radio callsign: HA5DI

"Amateur Radio: The First Technology-Based Social Network."

Offline cattail

  • Newbie
  • *
  • Posts: 16
Re: Wanted a servoblaster.ko in repo
« Reply #3 on: August 06, 2013, 06:14:22 PM »
 Thanks bmarkus.
  I tested it in raspbian with a servoblaster compiled ko , I only have a 5V servo , and unfortunately havn't driver it success in 3.3V GPIO for now, I'll use user space app (daemon) for more test first ...
 
« Last Edit: August 06, 2013, 06:48:29 PM by cattail »

Offline cattail

  • Newbie
  • *
  • Posts: 16
Re: Wanted a servoblaster.ko in repo
« Reply #4 on: August 17, 2013, 08:16:09 PM »
User space servod  is good , output gpio 3.3V can drive 5V servo moto.
use servoblaster  can  use up to 8 servos at a time .
(I have only 2 in my hand for testing.)

Servo power(4.8--6V) must another one, with GND connected with RaspberryPi's GND.
« Last Edit: August 17, 2013, 11:38:03 PM by cattail »

Offline bmarkus

  • Administrator
  • Hero Member
  • *****
  • Posts: 7183
    • My Community Forum
Re: Wanted a servoblaster.ko in repo
« Reply #5 on: August 17, 2013, 10:57:33 PM »
User space servod  is good , output gpio 3.3V can drive 5V servo moto.
use servoblaster  can  use up to 8 servos at a time .
(I have only 2 in my hand for testing.)

Servo power(4。8--6V) must another one, with GND link with RaspberryPi's GND.

Great! Can you create .tcz for repo addition?
Béla
Ham Radio callsign: HA5DI

"Amateur Radio: The First Technology-Based Social Network."

Offline cattail

  • Newbie
  • *
  • Posts: 16
Re: Wanted a servoblaster.ko in repo
« Reply #6 on: August 20, 2013, 01:49:37 AM »
Hi bmarkus

 I have search wiki for howto tcz, will try  tcztools and no lucky(I guess cauze GFW ),can you add tcztools in reply?
http://code.google.com/p/tcztools/

I have't master to make any tcz yet , I want to some slim tools tcz in repo, see
Topic: Beginner small apps (utility) needed
http://forum.tinycorelinux.net/index.php/topic,14887.0.html

For now I use make , get "servod" in path, and tested PWM mode, ok.
PCM mode , not full tested yet, only tested one servo .


cattail
« Last Edit: August 20, 2013, 01:51:30 AM by cattail »

Offline bmarkus

  • Administrator
  • Hero Member
  • *****
  • Posts: 7183
    • My Community Forum
Re: Wanted a servoblaster.ko in repo
« Reply #7 on: August 20, 2013, 02:19:05 AM »
For sure I will help to create it. You know the Chinese saying

"Teach hungry man fish instead of giving a fish" :)
Béla
Ham Radio callsign: HA5DI

"Amateur Radio: The First Technology-Based Social Network."