WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: Tiny Core 5.0 Alpha 2 Testing  (Read 127540 times)

aus9

  • Guest
Re: Tiny Core 5.0 Alpha 2 Testing
« Reply #15 on: June 13, 2013, 04:58:37 PM »
Quote
as testers conform the tc-4.x extensions work, they can be copied over to the tc-5.x repo

Quote
we ask that only experienced users test

and http://repo.tinycorelinux.net/5.x/x86/tcz/

good to know that you don't need to be an expert to do that part of the testing.
I think anyone can run the executable in a terminal to see what is missing or borking or have I misunderstood (again)?

aus9

  • Guest
Re: Tiny Core 5.0 Alpha 2 Testing
« Reply #16 on: June 13, 2013, 05:58:15 PM »
SpaceFM works but will need a extra dependency of
raid-dm-3.8.10-tinycore.tcz

OFFTOPIC I have submitted firefox v 21 and it loads without any error
On the old alpha thread mention was made of libpng and animation.

I am assuming you mean animated gif?
if so, firefox 21 runs such test site was
http://en.wikipedia.org/wiki/File:Rotating_earth_%28large%29.gif

More tests later.

Is it appropriate to talk about grub menu using core and rootfs here?

inxi loads ok
Code: [Select]
inxi -F
Resuming in non X mode: xrandr not found. For package install advice run: inxi --recommends
System:    Host: box Kernel: 3.8.10-tinycore i686 (32 bit)
           Desktop: N/A Distro: Core Linux
Machine:   System: ECS product: 945GCT-M2 version: 1.x
           Mobo: ECS model: 945GCT-M2 version: ECS
           Bios: American Megatrends version: 080012 date: 05/14/2008
CPU:       Dual core Pentium CPU E5200 (-MCP-) cache: 2048 KB flags: (lm sse sse2 sse3 ssse3)
           Clock Speeds: 1: 1203.00 MHz 2: 1203.00 MHz
Graphics:  Card: nVidia G96 [GeForce 9500 GT]
           X-Vendor: N/A driver: Resolution: N/A
Audio:     Card: Intel N10/ICH 7 Family High Definition Audio Controller
Network:   Card: Realtek RTL-8139/8139C/8139C+ driver: 8139too
           IF: eth0 state: unknown speed: 100 Mbps duplex: full mac: 00:21:97:76:2d:da
Drives:    HDD Total Size: 84.1GB (18.6% used) 1: id: /dev/sda model: WDC_WD800JD size: 80.0GB
           2: USB id: /dev/sdb model: DataTraveler_2.0 size: 4.1GB
Partition: ID: / size: 1.8G used: 15M (1%) fs: rootfs
           ID: /home size: 48G used: 4.9G (11%) fs: ext3
           ID: swap-1 size: 0.52GB used: 0.00GB (0%) fs: swap
           ID: swap-2 size: 1.08GB used: 0.00GB (0%) fs: swap
Sensors:   None detected - is lm-sensors installed and configured?
Info:      Processes: 148 Uptime: 0:12 Memory: 397.2/2024.7MB
           Client: Shell inxi: 1.8.17

Note I am running vesa here so can ignore xrandr for this test
« Last Edit: June 13, 2013, 06:14:47 PM by aus9 »

aus9

  • Guest
Re: Tiny Core 5.0 Alpha 2 Testing
« Reply #17 on: June 13, 2013, 06:21:13 PM »
ghostscript will only load if I provide a missing depend

libidn.tcz 

OOPS  ;D

email to gutmensch sent and bug reported in case other testers try it and want to report me (again)  8)
« Last Edit: June 13, 2013, 06:40:23 PM by aus9 »

aus9

  • Guest
Re: Tiny Core 5.0 Alpha 2 Testing
« Reply #18 on: June 13, 2013, 06:30:08 PM »
lilyterm loads and runs ok but I did not provide a wbar icon

will fix later

lxterminal loads wonderfully well.
« Last Edit: June 13, 2013, 06:32:43 PM by aus9 »

aus9

  • Guest
Re: Tiny Core 5.0 Alpha 2 Testing
« Reply #19 on: June 13, 2013, 06:37:22 PM »
mc loads but no wbar icon
runs ok for me

in 4.x wbar works fine so a puzzlement for me

mtpaint-3.21 and mtpaint-cli run fine by me

qpdf runs fine by me

this post has been editted by the local village idiot
« Last Edit: June 14, 2013, 05:49:01 PM by aus9 »

Offline coreplayer2

  • Hero Member
  • *****
  • Posts: 3020
Re: Tiny Core 5.0 Alpha 2 Testing
« Reply #20 on: June 13, 2013, 06:46:42 PM »
I had to delete mc and reinstall the latest to get an icon back ;)

Offline coreplayer2

  • Hero Member
  • *****
  • Posts: 3020
Re: Tiny Core 5.0 Alpha 2 Testing
« Reply #21 on: June 13, 2013, 06:48:41 PM »
btw, aus9 while your updating firefox type browsers, good job.  ok how about having a crack at " Shiretoko "  which is a great spinoff

« Last Edit: June 13, 2013, 06:51:08 PM by coreplayer2 »

Offline Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14516
Re: Tiny Core 5.0 Alpha 2 Testing
« Reply #22 on: June 13, 2013, 09:22:12 PM »
Is it appropriate to talk about grub menu using core and rootfs here?

Go ahead  :)

aus9

  • Guest
Re: Tiny Core 5.0 Alpha 2 Testing
« Reply #23 on: June 13, 2013, 10:00:04 PM »
Juanito

What do you use for your grub menu lines, if you use it?

Looking at google--- slitaz uses 4 rootfs...and based on that info initrd line might read
EDIT
initrd /boot/grub/core.gz /boot/grub/rootfs.gz

I just tried the reverse line to above and got a kernel message
"modprobe chdir (3.8.10-tinycore) No such file or directory

Can your remember having in rootfs that I could easily verify has loaded?

I await your advice Sir

EDIT 2
leafpad runs fine for me

Juanito
Forgive any rudeness, but for the alpha repo, are you in charge of it?
That is, do you have the power to edit across 4.x repo dep files to fix them up for 5.x?
I am thinking of my precious SpaceFm

This post has been editted by the local village idiot

coreplayer2
I have submitted firefox and seamonkey. I have a forum post in the news area asking for feedback on minefield.
I have not had a chance to look at icecat or Shiretoko but am aware of them. I looked at chromium-browser but AFAIK I would need to download 2G of source which I baulk at ATM.

Thanks for the heads up on the mc icon.
« Last Edit: June 14, 2013, 06:00:34 PM by aus9 »

Offline Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14516
Re: Tiny Core 5.0 Alpha 2 Testing
« Reply #24 on: June 13, 2013, 10:39:29 PM »
What do you use for your grub menu lines, if you use it?

Looking at google--- slitaz uses 4 rootfs...and based on that info initrd line might read
EDIT
initrd /boot/grub/core.gz /boot/grub/rootfs.gz

core.gz = rootfs.gz + modules.gz
core64.gz = rootfs.gz + modules64.gz

so, using syslinux to boot:
Code: [Select]
label rootfs
kernel /boot/vmlinuz
initrd /boot/rootfs.gz,/boot/modules.gz
append quiet yada-yada

or grub2:
Code: [Select]
menuentry "rootfs64" {
  linux /boot/vmlinuz64 quiet yada-yada
  initrd /boot/rootfs.gz /boot/modules64.gz
}

or, if your boot loader does not support multiple initrd, you can use core.gz or make your own with:
Code: [Select]
$ cat rootfs.gz modules.gz > core.gz

aus9

  • Guest
Re: Tiny Core 5.0 Alpha 2 Testing
« Reply #25 on: June 13, 2013, 10:52:54 PM »
1) caps LED works when pressed but
numlock LED fails to light

Do you need a dmeg or can you verify on your snazzy 64 bit computer?

2) Silly me, I was trying to append rootfs when it was already included!

Offline Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14516
Re: Tiny Core 5.0 Alpha 2 Testing
« Reply #26 on: June 13, 2013, 11:08:52 PM »
leafpad runs fine for me
copied over

Quote
I am thinking of my precious SpaceFm
since this is a bunch of deps, could you confirm that everything works in spacefm in tc-5.x?

aus9

  • Guest
Re: Tiny Core 5.0 Alpha 2 Testing
« Reply #27 on: June 13, 2013, 11:17:31 PM »
sure but before I do any concerns about libattr?

I have never used raid myself mine is just a simple ext3
Code: [Select]
tce-load -i raid-dm-3.8.10-tinycore.tcz SpaceFM
touch: /usr/local/tce.installed/raid-dm-3.8.10-tinycore: Permission denied
/etc/sysconfig/tcedir/optional/raid-dm-3.8.10-tinycore.tcz: OK
touch: /usr/local/tce.installed/libattr: Permission denied
libattr.tcz: OK
bash.tcz: OK
raid-dm-3.8.10-tinycore.tcz: OK
mdadm.tcz: OK
readline.tcz: OK
libdevmapper.tcz: OK
liblvm2.tcz: OK
lvm2.tcz: OK
popt.tcz: OK
libgpg-error.tcz: OK
libgcrypt.tcz: OK
cryptsetup.tcz: OK
util-linux.tcz: OK
ntfs-3g.tcz: OK
eject.tcz: OK
lsof.tcz: OK
parted.tcz: OK
libatasmart.tcz: OK
sg3-utils.tcz: OK
bsddb.tcz: OK
cracklib.tcz: OK
Linux-PAM.tcz: OK
polkit.tcz: OK
libpci.tcz: OK
pci-utils.tcz: OK
libusb.tcz: OK
usb-utils.tcz: OK
libattr.tcz: OK
acl.tcz: OK
udev-extra.tcz: OK
udisks.tcz: OK
libxcb-util.tcz: OK
libstartup-notification.tcz: OK
libcap.tcz: OK
gmp.tcz: OK
attr.tcz: OK
coreutils.tcz: OK
SpaceFM.tcz: OK

Offline coreplayer2

  • Hero Member
  • *****
  • Posts: 3020
Re: Tiny Core 5.0 Alpha 2 Testing
« Reply #28 on: June 14, 2013, 12:06:07 AM »
Re wget on TC-5.x

Have tested wget from the 4.x repo using an http request to a 100MB file on a data center on the other side of the galaxy;  success, downloaded file in just a few seconds.  ftp checks good also.

 speedtest.dallas.linode.com/speedtest/100MB-dallas.bin

https://www.linode.com/speedtest/

hope posting the link to a reliable speedtest is ok


looks like I was wrong to be skeptical on this app


Offline Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14516
Re: Tiny Core 5.0 Alpha 2 Testing
« Reply #29 on: June 14, 2013, 01:08:55 AM »
Code: [Select]
tce-load -i raid-dm-3.8.10-tinycore.tcz SpaceFM
touch: /usr/local/tce.installed/raid-dm-3.8.10-tinycore: Permission denied
/etc/sysconfig/tcedir/optional/raid-dm-3.8.10-tinycore.tcz: OK
touch: /usr/local/tce.installed/libattr: Permission denied

..not sure why you would get that error message when neither raid-dm-3.8.10-tinycore nor libattr have a start-up script...