General TC > General TC Talk
Touchscreen on Intermec CV60
onlyjazz:
I'll preface this, with I am a bit of a noob. I am running CorePlus on an Intermec CV60. Everything is working, and working well, except the touch screen. I don't think the touchscreen is being recognized, and it certainly isn't working. When I did a "cat" function on the device events, I could not find an event that was reacting to me touching the screen.
If anyone has some insight (even into where I should start) it would be very helpful and much appreciated! Thanks!
--I'm going to break this up a bit because the system keeps thinking I'm posting external links....though I'm not.
onlyjazz:
When I try to list the devices, I can only see a power button, PC speaker, keyboard and mouse, which seem to be handled on events 0-3.
The events shown under the /dev/inputs are event0, event1, event2, event3, mice, mouse0, and ts0.
I have seen another post related to the CV60 that suggested that the 8250_pnp driver may be involved and required.
onlyjazz:
lsmod gives me the following:
--- Code: ---Module Size Used by Tainted: P
cpufreq_powersave 12288 0
speedstep_lib 12288 0
cpufreq_userspace 12288 0
cpufreq_stats 12288 0
cpufreq_conservative 12288 0
b43 253952 0
mac80211 114688 1 b43
cfg80211 94208 2 b43,mac80211
squashfs 24576 37
scsi_wait_scan 12288 0
ssb 32768 1 b43
pcspkr 12288 0
yenta_socket 20480 0
pcmcia 28672 2 b43,ssb
serio_raw 12288 0
e100 28672 0
pcmcia_rsrc 16384 1 yenta_socket
pcmcia_core 16384 3 yenta_socket,pcmcia,pcmcia_rsrc
zcache 12288 0
zram 12288 1
loop 16384 74
--- End code ---
curaga:
The 8250 patch bug report says you need to set the serial ports to "always enabled" in bios, when using kernels < 3.1.
onlyjazz:
Curaga. Thanks for the reply. I have them all set to enabled. The other options were auto and OS managed. I'm not sure what those mean or whether I should bother trying them.
Navigation
[0] Message Index
[#] Next page
Go to full version