WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: tce-load problem  (Read 7377 times)

Offline Rich

  • Administrator
  • Hero Member
  • *****
  • Posts: 11178
Re: tce-load problem
« Reply #15 on: July 07, 2012, 11:25:55 PM »
Hi manit123
Click on the Control Pamel icon. The Device field should read  sda1/tce   , click Go and the backup should
be created. To shut down or reboot, click on the Exit icon, it will automatically generate a backup first.

Offline manit123

  • Sr. Member
  • ****
  • Posts: 315
Re: tce-load problem
« Reply #16 on: July 07, 2012, 11:32:03 PM »
As previously advised - I had removed cde & added waitusb=5 at boot.
It dropped me to cmd shell where 'startx'  command was not recognised.

Offline manit123

  • Sr. Member
  • ****
  • Posts: 315
Re: tce-load problem
« Reply #17 on: July 07, 2012, 11:35:15 PM »
this time I created tce/optional folder in /mnt/sda1 & backed up sda1/tce.
I got mydata.tgz of   1807004 bytes & nothing in optional folder.

Offline manit123

  • Sr. Member
  • ****
  • Posts: 315
Re: tce-load problem
« Reply #18 on: July 07, 2012, 11:37:47 PM »
should I reboot ?
I think 1807KB is minute in comparison to >100MB tcz files I have downloaded & installed currently.

Offline Rich

  • Administrator
  • Hero Member
  • *****
  • Posts: 11178
Re: tce-load problem
« Reply #19 on: July 07, 2012, 11:48:57 PM »
Hi manit123
Could I suggest you use one of the TC installation utilities. TC is not meant to be installed by third party tools.
Either get yourself back to a GUI and use the tc-install extension to do an install to a fresh pen drive, or if you
have access to a Windows machine, try the  core2usb  utility. You can find a link to that in the FAQs.

Offline manit123

  • Sr. Member
  • ****
  • Posts: 315
Re: tce-load problem
« Reply #20 on: July 07, 2012, 11:58:40 PM »
currently I have a single pendrive with tiny core installed by unetbootin. No hard disk.
I will make arrangement to make bootable usb using core2usb ASAP.
Then report in this thread.
Thank you.

Offline manit123

  • Sr. Member
  • ****
  • Posts: 315
Re: tce-load problem
« Reply #21 on: July 08, 2012, 11:57:01 AM »
I have used core2usb.
It seems to be backing up /home & /opt  folder not tcz files I have installed.
Looks like I have to exclusively mention them . But where ?

Offline tinypoodle

  • Hero Member
  • *****
  • Posts: 3857
Re: tce-load problem
« Reply #22 on: July 08, 2012, 12:25:22 PM »
Please refer to documentation and wiki for basic usage.
"Software gets slower faster than hardware gets faster." Niklaus Wirth - A Plea for Lean Software (1995)

Offline Rich

  • Administrator
  • Hero Member
  • *****
  • Posts: 11178
Re: tce-load problem
« Reply #23 on: July 08, 2012, 01:53:01 PM »
Hi manit123
Your extensions should be installed under  tce/optional. That is a persistent directory and should not be
included in you backup.

Offline manit123

  • Sr. Member
  • ****
  • Posts: 315
Re: tce-load problem
« Reply #24 on: July 08, 2012, 06:32:18 PM »
when I selected 'on boot' then go . Then tcz file gets saved in /mnt/sda1/tce/optional & entry gets added in /mnt/sda1/tce/onboot.lst . Can you point me to wiki explaining on-demand option ?

Offline manit123

  • Sr. Member
  • ****
  • Posts: 315
Re: tce-load problem
« Reply #25 on: July 08, 2012, 06:49:56 PM »

Offline manit123

  • Sr. Member
  • ****
  • Posts: 315
Re: tce-load problem
« Reply #26 on: July 10, 2012, 06:26:36 AM »
When I select an app to download+load then tinycore downloads all deps even though they have been currently installed .
Why ?
If I copy the tcz,dep & md5sum file to /tmp/tce/optional then will it not download after checking tcz with md5sum ?

Offline tinypoodle

  • Hero Member
  • *****
  • Posts: 3857
Re: tce-load problem
« Reply #27 on: July 10, 2012, 07:24:55 AM »
The "Size" tab in appsbrowser will show you which extensions will be downloaded.
"Software gets slower faster than hardware gets faster." Niklaus Wirth - A Plea for Lean Software (1995)

Offline Rich

  • Administrator
  • Hero Member
  • *****
  • Posts: 11178
Re: tce-load problem
« Reply #28 on: July 10, 2012, 11:16:04 AM »
Hi manit123
Quote
When I select an app to download+load then tinycore downloads all deps even though they have been currently installed .
What makes you think that it's downloading dependencies that are already installed?
Quote
If I copy the tcz,dep & md5sum file to /tmp/tce/optional then will it not download after checking tcz with md5sum ?
The  /tmp/tce  directory is used in conjunction with the copy2fs files to control if extensions should be loop mounted
or loaded straight into RAM. You should not be manually copying files around behind the operating systems back.

Offline manit123

  • Sr. Member
  • ****
  • Posts: 315
Re: tce-load problem
« Reply #29 on: July 10, 2012, 06:58:13 PM »
Code: [Select]
$tce-load -wi audacity-1.3.x.tcz
ffmpeg-0.7.tcz.dep OK
libavcodec52.tcz.dep OK
libavdevice52.tcz.dep OK
libavformat52.tcz.dep OK
libavfilter1.tcz.dep OK
libswscale0.tcz.dep OK
libsamplerate.tcz.dep OK
wxgtk.tcz.dep OK
gtk2.tcz.dep OK
atk.tcz.dep OK
glib2.tcz.dep OK
cairo.tcz.dep OK
fontconfig.tcz.dep OK
pango.tcz.dep OK
gdk-pixbuf2.tcz.dep OK
shared-mime-info.tcz.dep OK
Downloading: Xlibs.tcz
Connecting to distro.ibiblio.org (152.19.134.43:80)
Xlibs.tcz            100% |*********************************************************************************************************************|  3236k  0:00:00 ETA
Xlibs.tcz: OK
Downloading: libxml2.tcz
Connecting to distro.ibiblio.org (152.19.134.43:80)
libxml2.tcz          100% |*********************************************************************************************************************|   680k  0:00:00 ETA
libxml2.tcz: OK
Downloading: libffi.tcz
Connecting to distro.ibiblio.org (152.19.134.43:80)
libffi.tcz           100% |*********************************************************************************************************************| 12288   0:00:00 ETA
libffi.tcz: OK
Downloading: glib2.tcz
Connecting to distro.ibiblio.org (152.19.134.43:80)
glib2.tcz            100% |*********************************************************************************************************************|  1384k  0:00:00 ETA
glib2.tcz: OK
Downloading: shared-mime-info.tcz
Connecting to distro.ibiblio.org (152.19.134.43:80)
shared-mime-info.tcz 100% |*********************************************************************************************************************|   456k  0:00:00 ETA
shared-mime-info.tcz: OK
Downloading: gdk-pixbuf2.tcz
Connecting to distro.ibiblio.org (152.19.134.43:80)
gdk-pixbuf2.tcz      100% |*********************************************************************************************************************|   268k  0:00:00 ETA
gdk-pixbuf2.tcz: OK
Downloading: libxcb.tcz
Connecting to distro.ibiblio.org (152.19.134.43:80)
libxcb.tcz           100% |*********************************************************************************************************************|   108k  0:00:00 ETA
libxcb.tcz: OK
Though I have
Code: [Select]
$df
Filesystem                Size      Used Available Use% Mounted on
rootfs                    2.9G    265.3M      2.6G   9% /
tmpfs                     1.6G         0      1.6G   0% /dev/shm
/dev/sda1                 3.7G      3.0G    786.3M  79% /mnt/sda1
/dev/loop0                4.8M      4.8M         0 100% /tmp/tcloop/Mplayer-nodeps
/dev/loop1              656.0K    656.0K         0 100% /tmp/tcloop/Xorg-7.6-lib
/dev/loop2              156.0K    156.0K         0 100% /tmp/tcloop/atk
/dev/loop3              504.0K    504.0K         0 100% /tmp/tcloop/cairo
/dev/loop4                1.1M      1.1M         0 100% /tmp/tcloop/curl
/dev/loop5               92.0K     92.0K         0 100% /tmp/tcloop/dbus-glib
/dev/loop6              388.0K    388.0K         0 100% /tmp/tcloop/dbus
/dev/loop7               76.0K     76.0K         0 100% /tmp/tcloop/expat2
/dev/loop8              108.0K    108.0K         0 100% /tmp/tcloop/ffmpeg-0.7
/dev/loop9               20.1M     20.1M         0 100% /tmp/tcloop/firefox
/dev/loop10             132.0K    132.0K         0 100% /tmp/tcloop/fontconfig
/dev/loop11               3.9M      3.9M         0 100% /tmp/tcloop/foxit_reader
/dev/loop12              48.0K     48.0K         0 100% /tmp/tcloop/gamin
/dev/loop13             268.0K    268.0K         0 100% /tmp/tcloop/gdk-pixbuf2
/dev/loop14               1.4M      1.4M         0 100% /tmp/tcloop/glib2
/dev/loop15               8.2M      8.2M         0 100% /tmp/tcloop/gnome-icon-theme
/dev/loop16             772.0K    772.0K         0 100% /tmp/tcloop/graphics-libs-1
/dev/loop17               2.8M      2.8M         0 100% /tmp/tcloop/gtk2
/dev/loop18               8.0K      8.0K         0 100% /tmp/tcloop/hicolor-icon-theme
/dev/loop19             268.0K    268.0K         0 100% /tmp/tcloop/jack-lib
/dev/loop20             376.0K    376.0K         0 100% /tmp/tcloop/libasound
/dev/loop21               2.8M      2.8M         0 100% /tmp/tcloop/libavcodec52
/dev/loop22              12.0K     12.0K         0 100% /tmp/tcloop/libavdevice52
/dev/loop23              56.0K     56.0K         0 100% /tmp/tcloop/libavfilter1
/dev/loop24             512.0K    512.0K         0 100% /tmp/tcloop/libavformat52
/dev/loop25              60.0K     60.0K         0 100% /tmp/tcloop/libavutil50
/dev/loop26             244.0K    244.0K         0 100% /tmp/tcloop/libcups
/dev/loop27              12.0K     12.0K         0 100% /tmp/tcloop/libffi
/dev/loop28             160.0K    160.0K         0 100% /tmp/tcloop/libfm
/dev/loop29              20.0K     20.0K         0 100% /tmp/tcloop/libnotify
/dev/loop30              12.0K     12.0K         0 100% /tmp/tcloop/libogg
/dev/loop31              20.0K     20.0K         0 100% /tmp/tcloop/libpostproc51
/dev/loop32             104.0K    104.0K         0 100% /tmp/tcloop/libswscale0
/dev/loop33             252.0K    252.0K         0 100% /tmp/tcloop/libvorbis
/dev/loop34             204.0K    204.0K         0 100% /tmp/tcloop/libvpx0
/dev/loop35             108.0K    108.0K         0 100% /tmp/tcloop/libxcb
/dev/loop36             680.0K    680.0K         0 100% /tmp/tcloop/libxml2
/dev/loop37               4.5M      4.5M         0 100% /tmp/tcloop/lxde-icon-theme
/dev/loop38              48.0K     48.0K         0 100% /tmp/tcloop/menu-cache
/dev/loop39              12.0K     12.0K         0 100% /tmp/tcloop/ncurses-common
/dev/loop40             148.0K    148.0K         0 100% /tmp/tcloop/ncurses
/dev/loop41              18.0M     18.0M         0 100% /tmp/tcloop/opera-11
/dev/loop42             524.0K    524.0K         0 100% /tmp/tcloop/pango
/dev/loop43              60.0K     60.0K         0 100% /tmp/tcloop/pcmanfm2
/dev/loop44             204.0K    204.0K         0 100% /tmp/tcloop/pixman
/dev/loop45             456.0K    456.0K         0 100% /tmp/tcloop/shared-mime-info
/dev/loop46             724.0K    724.0K         0 100% /tmp/tcloop/vim-7.2-bin
/dev/loop47             864.0K    864.0K         0 100% /tmp/tcloop/OSS-modules-3.0.21-tinycore
/dev/loop48             692.0K    692.0K         0 100% /tmp/tcloop/OSS
/dev/loop49             360.0K    360.0K         0 100% /tmp/tcloop/ttf-bitstream-vera
/dev/loop50              52.0K     52.0K         0 100% /tmp/tcloop/leafpad
/dev/loop51              48.6M     48.6M         0 100% /tmp/tcloop/sun-jre
/dev/loop52             116.0K    116.0K         0 100% /tmp/tcloop/atkmm
/dev/loop53              68.0K     68.0K         0 100% /tmp/tcloop/cairomm
/dev/loop54             628.0K    628.0K         0 100% /tmp/tcloop/glibmm
/dev/loop55             332.0K    332.0K         0 100% /tmp/tcloop/gparted
/dev/loop56               1.6M      1.6M         0 100% /tmp/tcloop/gtkmm
/dev/loop57              12.0K     12.0K         0 100% /tmp/tcloop/libsigc++
/dev/loop58              80.0K     80.0K         0 100% /tmp/tcloop/pangomm
/dev/loop59             240.0K    240.0K         0 100% /tmp/tcloop/parted
/dev/loop60               7.7M      7.7M         0 100% /tmp/tcloop/flash11
/dev/loop61             324.0K    324.0K         0 100% /tmp/tcloop/sqlite3
/dev/loop62             132.0K    132.0K         0 100% /tmp/tcloop/nspr
/dev/loop63               1.4M      1.4M         0 100% /tmp/tcloop/nss
/dev/loop64             512.0K    512.0K         0 100% /tmp/tcloop/ntfs-3g
/dev/sdb1               931.5G    822.7G    108.8G  88% /mnt/sdb1
/dev/loop65              80.0K     80.0K         0 100% /tmp/tcloop/glib1
/dev/loop66             716.0K    716.0K         0 100% /tmp/tcloop/gtk1
/dev/loop67              64.0K     64.0K         0 100% /tmp/tcloop/libmad
/dev/loop68             840.0K    840.0K         0 100% /tmp/tcloop/libssl-0.9.8
/dev/loop69             296.0K    296.0K         0 100% /tmp/tcloop/flac
/dev/loop70              20.0K     20.0K         0 100% /tmp/tcloop/libao
/dev/loop71             108.0K    108.0K         0 100% /tmp/tcloop/vorbis-tools
/dev/loop72             244.0K    244.0K         0 100% /tmp/tcloop/libsndfile
/dev/sdc1                14.9G    825.9M     14.1G   5% /mnt/sdc1
see libxml2 already mounted , yet being downloaded.
Ditto for libffi,glib2,shared-mime-info,gdk-pixbuf2,libxcb

Also in ubuntu I used to do the same.
That is copy deb file from somewhere /var/cache/packages . Then OS thinks that previously files were downloaded but could not be installed so it installs them after checking integrity of debs.
« Last Edit: July 10, 2012, 07:06:50 PM by manit123 »