WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: Transfer rate on the ftp server  (Read 9615 times)

Offline Rich

  • TinyCore Moderator
  • Hero Member
  • *****
  • Posts: 6965
Re: Transfer rate on the ftp server
« Reply #30 on: May 18, 2012, 07:38:41 AM »
Hi forsik
Maybe it is the network card limiting you now. You previously ran  iwconfig  and it reported a Bit Rate
of 54Mbits/sec, what does it say now?

Offline forsik

  • WikiUser
  • *
  • Posts: 28
Re: Transfer rate on the ftp server
« Reply #31 on: May 18, 2012, 07:44:00 AM »
iwconfig only works with wireless connections, I use eth0.
(iwconfig says 54 mb/s and b, g standard for the wifi card)

I spent a few tests the speed of internet connection. Most of them have given the result of 2 .. 6 mb / s, one of the tests gives a speed of 11 mb/s. If 10 mb/s download speed actually achievable from the Internet, what's the problem get so much speed in the network ... I do not understand...
« Last Edit: May 18, 2012, 09:30:43 AM by forsik »

Offline forsik

  • WikiUser
  • *
  • Posts: 28
Re: Transfer rate on the ftp server
« Reply #32 on: May 19, 2012, 04:28:17 PM »
I saved the data from the usb drive and formatted it in ext3. On a router transfer speed of a file has not changed. But there is the possibility to upload up to 5 files at a time, eventually I get the latch speed, a total of up to 15 Mb/s. (No, all the same for less ... more than 6-10 mb/s speed is rarely)

We'll see how it will affect the connection netbook usb drive. In this case, restrictions on the number of simultaneous connections is not present. Let's see what the processor can handle.
« Last Edit: May 19, 2012, 04:45:35 PM by forsik »