WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: Core v4.2.1  (Read 30825 times)

Offline roberts

  • Administrator
  • Hero Member
  • *****
  • Posts: 7361
  • Founder Emeritus
Core v4.2.1
« on: January 07, 2012, 09:33:42 PM »
Core 4.2.1 a minor bug fix and adjustments release is now available at
http://distro.ibiblio.org/pub/linux/distributions/tinycorelinux/4.x/x86/release

Change Log:
* Updated aterm with patches for dead key issue.
* Updated dhcpd.sh - added timeout of 5 sec to udevadm settle
* Updated tce-setup to capture suppress boot messages as requested,
* Updated CorePlus with latest extensions from repository plus Openbox and more firmware extensions.

Note. Updates to the following X/GUI and widow manage extensions:

Xprogs.tcz, Xlibs.tcz, fltk-1.10.tcz, flwm.tcz, flwm_topside.tcz, fluxbox,tcz, and hackedbox.tcz
10+ Years Contributing to Linux Open Source Projects.

Offline netnomad

  • Hero Member
  • *****
  • Posts: 1026
Re: Core v4.2.1
« Reply #1 on: January 08, 2012, 09:43:19 AM »
hi roberts,

with the help of this following line in my .Xdefaults i configured a nice and very readable aterm:

.Xdefaults
aterm*font:*-fixed-*-*-*-20-*

since 4.2.1 this font-configuration has no effect anymore and the font is tiny and hard to read again.
do you see there any way to get the used behavior back!?

thank you in advance for your help and advice.

Offline nim108

  • Full Member
  • ***
  • Posts: 107
Re: Core v4.2.1
« Reply #2 on: January 08, 2012, 09:57:27 AM »
Awesome, thanks for the release robert! Testing w/ Openbox shortly. Thank you for also officially adding the udevadm settle timeout, that was getting annoying.

Offline curaga

  • Administrator
  • Hero Member
  • *****
  • Posts: 10957
Re: Core v4.2.1
« Reply #3 on: January 08, 2012, 09:59:58 AM »
@netnomad

Can't reproduce, I replaced "fixed" in .Xdefaults with your line in 4.2.1 and the font was much bigger.
The only barriers that can stop you are the ones you create yourself.

Offline netnomad

  • Hero Member
  • *****
  • Posts: 1026
Re: Core v4.2.1
« Reply #4 on: January 08, 2012, 10:51:27 AM »
hi curaga,

it was my mistake and i can reproduce it:
in my .Xdefaults were two lines that did not conflict yet, until 4.2.1:

aterm*font:*-fixed-*-*-*-20-*
aterm*font:fixed

up to 4.2 only the first line was used, since 4.2.1 the second line did configure the font.

thank you for your reply.

Online Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14516
Re: Core v4.2.1
« Reply #5 on: January 09, 2012, 07:00:56 AM »
The small updates to flwm are much appreciated  :)

Offline thane

  • Hero Member
  • *****
  • Posts: 688
Re: Core v4.2.1
« Reply #6 on: January 09, 2012, 10:53:29 PM »
Second that. After moving to 4.2.1 my mouse wheel suddenly started to work again.

Offline floppy

  • Hero Member
  • *****
  • Posts: 577
Re: Core v4.2.1
« Reply #7 on: January 20, 2012, 12:47:48 PM »
I installed today 4.2.1 on a pentium 4 (RAM 1GB, HDD 80GB, nvidia card, Wifi). Here is my experience. And perhaps few wishes.
- I missed a line /xxx/.filetool.lst in .filetool.lst (at the second boot, I discovered my backup was not correctly done because this line was not there)
- I could not use fluxbox because it did not accept the background (flwm_topside is fine with the backgrounds)
- I missed a functionning GPARTED in the muticore.iso (after installing TC on the full HDD, I could not make a SWAP and new home partition because only 1 partition was made and it was locked from the boot sequence). Perhaps create a 2(?)GB maximum partition in case of HDD full install? the (2) GBs could be asked per menu in the TC-install extension?. I know, I should have partitionned with GPARTED before the HDD install, but I forgot it, and in this case I used a knoppix CD because it has GPARTED from the beginning and it was easier for me with an existing knoppix CD I had.
- put a new menu in the CD boot menu? PLOP boot loader would be great.. it would have helped me in starting my SD card from the USB adapter (my BIOS did not recognized my SD on USB adapter). Instead of this, I choosed to boot knoppix, burned a CD with multicore.iso and then started TC from it. Using an USB or a SD/CF on USB in the future could avoid burning CDs. This PLOP boot loader would only take a bit space on the CD. Or perhaps I should have simply used another CD (UBCD?) with PLOP on it. But in any case, all future TCL isos could have plop.
- I started with a PS2 mouse. Later changed to an USB mouse. No issue at all.
- Wifi: perfect recognized
- Boot speed: very very good
The mother of the family will be happy.. she wanted to throw away this slow winXP PC. I convinced her to give it to me for a try. Now, it is very very good. And I give it back for her children (12..17).
« Last Edit: January 21, 2012, 02:33:01 PM by floppy »
AMD K6-IIIATZ 550MHz MB DFI K6xv3/+66
P4 HP DC7100 3GB 3GHz
Samsung NC10 boot from SD card port (via USB reader)
.. all TinyCore proofed

Offline Xianwen Chen

  • Full Member
  • ***
  • Posts: 142
Re: Core v4.2.1
« Reply #8 on: January 21, 2012, 09:39:24 AM »
Recent kernel just moved my laptop's wireless adapter's driver out of the stage sector. Is there a plan for an updated kernel in the near future?

Offline Rich

  • Administrator
  • Hero Member
  • *****
  • Posts: 11178
Re: Core v4.2.1
« Reply #9 on: January 21, 2012, 09:49:08 AM »
Hi Xianwen Chen
You forgot to mention which driver you use.

Offline Xianwen Chen

  • Full Member
  • ***
  • Posts: 142
Re: Core v4.2.1
« Reply #10 on: January 21, 2012, 10:00:48 AM »
Thank you Rich. I think it is a Broadcom (bcm something) chip. I compiled it when it was in stage one year ago when I was running Gentoo. It seems that Core Linux doesn't have lspci nor lsusb. I cannot get the chip information right now.

Offline Rich

  • Administrator
  • Hero Member
  • *****
  • Posts: 11178
Re: Core v4.2.1
« Reply #11 on: January 21, 2012, 10:10:49 AM »
Hi Xianwen Chen
Quote
It seems that Core Linux doesn't have lspci nor lsusb.
I think you always had to download them from the repository.

Offline curaga

  • Administrator
  • Hero Member
  • *****
  • Posts: 10957
Re: Core v4.2.1
« Reply #12 on: January 21, 2012, 10:13:07 AM »
Recent kernel just moved my laptop's wireless adapter's driver out of the stage sector. Is there a plan for an updated kernel in the near future?

Major kernel changes are usually reserved for the major TC versions.
The only barriers that can stop you are the ones you create yourself.

Offline Xianwen Chen

  • Full Member
  • ***
  • Posts: 142
Re: Core v4.2.1
« Reply #13 on: January 21, 2012, 10:23:20 AM »
Recent kernel just moved my laptop's wireless adapter's driver out of the stage sector. Is there a plan for an updated kernel in the near future?

Major kernel changes are usually reserved for the major TC versions.
Okay. Is there a plan for TC 5?

Offline Xianwen Chen

  • Full Member
  • ***
  • Posts: 142
Re: Core v4.2.1
« Reply #14 on: January 21, 2012, 10:23:53 AM »
Hi Xianwen Chen
Quote
It seems that Core Linux doesn't have lspci nor lsusb.
I think you always had to download them from the repository.
Thank you Rich. Which repository are you referring to?