Tiny Core Linux

Tiny Core Base => Corepure64 => Topic started by: puppybyte! on September 17, 2023, 11:24:45 PM

Title: soundcard doesn't remember after settting default in alsamixer
Post by: puppybyte! on September 17, 2023, 11:24:45 PM

Running TC64 with JMW.  alsamixergui set to the correct card Salyin USB, but doesn't play so I change to the correct card using alsamixer, followed by escape key.  when I type alsactl init, it displays the wrong sound source.

Code: [Select]

$: inxi -Fz | grep Audio
Audio:
  Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio
  Device-2: Saiyin USB Audio driver: hid-generic,snd-usb-audio,usbhid

What am I doing wrong?, how do I blacklist the card?

Title: Re: soundcard doesn't remember after settting default in alsamixer
Post by: puppybyte! on September 18, 2023, 10:26:56 AM

I installed pulseaudio and pavucontrol and seems to be working better.  Now after each boot I have to startup pavucontrol and disable default card and seems to work better.   Is there a way to set the pavucontrol setting so I won't have to reset each time?  or blacklist my default card?

Title: Re: soundcard doesn't remember after settting default in alsamixer
Post by: Rich on September 18, 2023, 10:55:02 AM

Hi puppybyte!
Maybe this is of some interest:
https://forum.tinycorelinux.net/index.php/topic,26153.0.html

Title: Re: soundcard doesn't remember after settting default in alsamixer
Post by: aus9 on September 18, 2023, 06:43:48 PM

Hi

I have updated my post linked to by Rich.
https://forum.tinycorelinux.net/index.php/topic,26153.msg170497.html#msg170497

For this method to work you need to name your bootloader.
For grub bootloader  bootcode is on the linux line.
If you are using syslinux its on the APPEND line
and is most likely going to be

Quote

blacklist=snd_hda_intel

2) Without rebooting please post full output to this command.

Code: [Select]

lsmod | grep snd
3) For only your usb device, does it need any firmware loaded?
If so it should appear at least one line higher than alsa or pulseaudio in your boot list such as onboot.lst

4) I am not a fan of pulseaudio by better do you mean sound quality?

5) My updated trick to disable HDMI will work for you whether you use alsa or pulseaudio  ;D