------------[ cut here ]------------
NETDEV WATCHDOG: eth1 (igb): transmit queue 0 timed out
WARNING: CPU: 1 PID: 0 at 0xc05e717e
Modules linked in: cpufreq_conservative cpufreq_userspace cpufreq_powersave igb i2c_algo_bit squashfs zstd_decompress ptp pps_core serio_raw ac pcspkr r6040 loop
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.4.3-tinycore #2020
Hardware name: WinSystems, Inc. PPM-C412/PPM-C412, BIOS 41216246 08/01/18
EIP: 0xc05e717e
Code: 80 3d 10 bd 88 c0 00 75 30 89 f0 c6 05 10 bd 88 c0 01 e8 d1 2e fd ff 57 50 8d 83 58 fd ff ff 50 68 9d 99 7c c0 e8 ec fe b5 ff <0f> 0b 83 c4 10 eb 08 47 05 00 01 00 00 eb a7 8b 83 80 fe ff ff 8b
EAX: 00000037 EBX: f03862a8 ECX: 00000001 EDX: f1097e8c
ESI: f0386000 EDI: 00000000 EBP: f1097f6c ESP: f1097f4c
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 EFLAGS: 00200296
CR0: 80050033 CR2: b7e7c794 CR3: 30367000 CR4: 00000690
Call Trace:
<SOFTIRQ>
? 0xc05e70c1
0xc018bf62
0xc018c101
? 0xc05e70c1
0xc018c140
0xc06a70cd
? 0xc06a7030
0xc01152e6
</SOFTIRQ>
? 0xc014a422
? 0xc06a6e5a
? 0xc06a56fd
? 0xc06a39b8
? 0xc06a39c2
? 0xc06a0068
? 0xc06a39c2
? 0xc011ac39
? 0xc06a3b21
? 0xc0162724
? 0xc0162678
? 0xc0162934
? 0xc0133d7a
? 0xc0100224
---[ end trace 780411748bea9e6d ]---
igb 0000:01:00.0 eth1: Reset adapter
igb 0000:01:00.0 eth1: igb: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
igb 0000:01:00.0 eth1: Reset adapter
igb 0000:01:00.0 eth1: igb: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
igb 0000:01:00.0 eth1: Reset adapter
igb 0000:01:00.0 eth1: igb: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
igb 0000:01:00.0 eth1: Reset adapter
igb 0000:01:00.0 eth1: igb: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
[code][ 36.176529] pcm512x 1-004d: Failed to get supply 'AVDD': -517
[ 36.176536] pcm512x 1-004d: Failed to get supplies: -517
[ 36.191753] pcm512x 1-004d: Failed to get supply 'AVDD': -517[/code]
[ 36.176529] pcm512x 1-004d: Failed to get supply 'AVDD': -517
[ 36.176536] pcm512x 1-004d: Failed to get supplies: -517
[ 36.191753] pcm512x 1-004d: Failed to get supply 'AVDD': -517
eth0 to ipaddress 192.198.200.6 netmask 255.255.0.0
eth1 to ipaddress 10.10.9.10 netmask 255.255.255.0
------------[ cut here ]------------
NETDEV WATCHDOG: eth1 (igb): transmit queue 0 timed out
WARNING: CPU: 0 PID: 0 at 0xc0630552
Modules linked in: cpufreq_userspace cpufreq_conservative cpufreq_powersave igb ac ptp pps_core pcspkr serio_raw r6040 squashfs loop
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.3-tinycore #2021
Hardware name: WinSystems, Inc. PPM-C412/PPM-C412, BIOS 41216246 08/01/18
EIP: 0xc0630552
Code: 3d 96 e7 96 c0 00 75 31 8b 45 f0 c6 05 96 e7 96 c0 01 e8 46 22 fd ff 56 50 8d 83 58 fd ff ff 50 68 2c db 83 c0 e8 a3 6e 0c 00 <0f> 0b 83 c4 10 eb 08 46 05 00 01 00 00 eb a9 8b 83 7c fe ff ff 89
EAX: 00000037 EBX: f6b3a2a8 ECX: 00000000 EDX: 00000000
ESI: 00000000 EDI: ffffba40 EBP: c1015f70 ESP: c1015f50
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 EFLAGS: 00200296
CR0: 80050033 CR2: 08ecddb4 CR3: 0199b000 CR4: 00000690
Call Trace:
<SOFTIRQ>
? 0xc063049a
0xc018f089
0xc018f678
? 0xc063049a
? 0xc018a582
0xc018f6ac
0xc0708af3
? 0xc0708a58
0xc011690e
</SOFTIRQ>
? 0xc014ae4d
? 0xc014b08b
? 0xc07031f0
? 0xc07086cc
? 0xc01600d8
? 0xc07031c8
? 0xc070741e
? 0xc01600d8
? 0xc07031c8
? 0xc070741e
? 0xc04219c5
? 0xc0421946
? 0xc05b9f41
? 0xc05ba0c7
? 0xc016395f
? 0xc0163ab1
? 0xc0703c39
? 0xc09826fe
? 0xc0982acc
? 0xc098220c
? 0xc01001e4
---[ end trace 2119e3d4def84d0b ]---
igb 0000:01:00.0 eth1: Reset adapter
igb 0000:01:00.0 eth1: igb: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
igb 0000:01:00.0 eth1: Reset adapter
igb 0000:01:00.0 eth1: igb: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
igb 0000:01:00.0 eth1: Reset adapter
igb 0000:01:00.0 eth1: igb: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
usb 1-3: new high-speed USB device number 5 using ehci-pci
module_blacklist=igb blacklist=igb
Reboot your machine.tce-status -i | grep i2c-5.10.3-tinycore
That command will return nothing if i2c-5.10.3-tinycore is not installed.sudo modprobe igb debug=16
sudo pkill udhcpc
sudo ifconfig eth1 10.10.9.10 netmask 255.255.255.0 broadcast 10.10.9.255 up
modprobe -r igb
modprobe igb debug=16
modinfo igb
.pci=nomsi pci=pcie_scan_all
Remove the blacklist boot codes.You are a pure genius.......Oh I wouldn't go that far. You provided the answer with the Lubuntu dmesg listing. :)
igb 0000:01:00.0: Using legacy interrupts. 1 rx queue(s), 1 tx queue(s)
igb 0000:01:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
----- Snip -----
NETDEV WATCHDOG: eth1 (igb): transmit queue 0 timed out
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.6 root=UUID=769cdaa5-e3c0-4dde-89bd-fe5e76a113d0 ro quiet splash pci=nomsi pci=pcie_scan_all vt.handoff=7