Tiny Core Linux

Tiny Core Base => TCB Bugs => Topic started by: xor on February 24, 2020, 02:05:45 AM

Title: "startx" command does not work in kernel setup
Post by: xor on February 24, 2020, 02:05:45 AM
I only experienced this issue in TCL 11 setup.
I provide access via ethernet cable.
file downloads successful
"startx" command does not work in kernel setup

Code: [Select]
$ tce-load -wi graphics-5.4.3-tinycore
$ tce-load -wi Xorg-7.7-3d
$ tce-load -wi xf86-video-ati
$ tce-load -wi xf86-video-amdgpu
$ tce-load -wi firmware-amdgpu
$ tce-load -wi firmware-radeon
$ tce-load -wi alsa
$ tce-load -wi pavucontrol 
$ tce-load -wi wbar
$ tce-load -wi aterm
$ tce-load -wi flwm_topside
$ startx
Title: Re: "startx" command does not work in kernel setup
Post by: Juanito on February 24, 2020, 02:39:58 AM
Do you see any errors in /var/log/Xorg.0.log?

Do you see any error messages with:
Code: [Select]
$ /usr/local/bin/Xorg -nolisten tcp
Title: Re: "startx" command does not work in kernel setup
Post by: xor on February 24, 2020, 03:05:42 AM
I cannot upload to hdd.
I upload the iso file to sd-kart.
https://www.pendrivelinux.com/universal-usb-installer-easy-as-1-2-3/
  then I create a re-personalized iso with ezramaster.

how do i print or copy the bug report to sd-card
I can post to the forum in this way,

I don't know linux cmd much
Title: Re: "startx" command does not work in kernel setup
Post by: Juanito on February 24, 2020, 03:28:54 AM
Please take the time to learn about the linux copy command "cp".
Title: Re: "startx" command does not work in kernel setup
Post by: xor on February 24, 2020, 06:35:32 AM
Please take the time to learn about the linux copy command "cp".

Code: [Select]
tc@box:~$ tce-load -w graphics-5.4.3-tinycore
tc@box:~$ tce-load -wi Xorg-7.7-3d
tc@box:~$ tce-load -wi wbar aterm flwm_topside
that way I was able to get on the desktop.
I made the other uploads from the desktop.

---

tc@box:~$ tce-load -i graphics-5.4.3-tinycore
or
tc@box:~$ tce-load -wi graphics-5.4.3-tinycore
when trying to load in this way, the command screen freezes.
Title: Re: "startx" command does not work in kernel setup
Post by: Juanito on February 24, 2020, 07:00:32 AM
You cannot load the graphics-KERNEL extension from the gui, you need to load it from the console prompt or "onboot".
Title: Re: "startx" command does not work in kernel setup
Post by: xor on February 24, 2020, 07:06:40 AM
You cannot load the graphics-KERNEL extension from the gui, you need to load it from the console prompt or "onboot".

I already know how to install from console
startx command is not working on console.

works after limited installation!

Added "Xorg.0" to the message

??? By the way, which driver of my graphics card is visible!
Title: Re: "startx" command does not work in kernel setup
Post by: Rich on February 24, 2020, 07:34:55 AM
Hi xor
... ??? By the way, which driver of my graphics card is visible!
radeon_drv.so  provided by  xf86-video-ati.  Your card is listed as  r600  and  ARUBA.