Tiny Core Linux
Tiny Core Base => Raspberry Pi => Topic started by: imo on November 02, 2019, 02:24:52 AM
-
Hi all
My first time here.
The concept behing tinycore for RPI seems very interesting to me (no big dependency of SD Card) so I am thinking to use it to create some (open) product concept/prototype.
I have already installed the bluetooth dev support and today I can compile c programs that include bluetooth/bluetooth.h and also link the program with -lbluetooth with success. However $hcitool dev executes well but returns no (bluetooth) interface.
I have installed WiFi by installing packages and executing a .sh file at the end. Is there the same thing to install bluetooth interface? Please, could you fuide me to install bluetooth on my RPI zero W?
Thanks a lot
Imo
-
Hi imo
Welcome to the forum. Does this help:
http://forum.tinycorelinux.net/index.php/topic,20854.0.html
-
I ma using a RPIzeroW and inside config.txt there is no block for it. I just see Pi1, Pi2 and Pi3 . Which one should I choose?
By the way, how:
$ cat /mnt/mmcblk0p1/config.txt | grep -i pi3
[PI3]
#dtoverlay=pi3-disable-bt
#dtoverlay=pi3-miniuart-bt
a cat command can enable bluetooth bluetooth?
-
What?
I am using RPIzeroW because of its form factor! I am planning to create a prototype and a RPIzeroW must be used.
Well, dos tinycore has support for bluetooth on RPIzerow?
Eventhough having a RPIZeroW I have commented the
#dtoverlay=pi3-disable-bt
I dont have the #dtoverlay=pi3-miniuart-bt entry on config.txt
and saved the file and then reboot.
then
tce-load -i firmware-rpi3-bt bluez (ok!)
sudo modprobe hci_uart (no such module hci_uart)
How do I get the module hci_uart?
-
sudo modprobe hci_uart (no such module hci_uart)
How do I get the module hci_uart?
Not sure which piCore version you are running, but you need this extension bluetooth-4.9.22-piCore.tcz (Or the one that matches your kernel version)
-
I am using RPI zero W and the piCore-9.0.3 and the software from: http://tinycorelinux.net/9.x/armv7/tcz
I have just turned it on then
tce-load -i bluetooth-4.9.22-piCore
tce-load -i firmware-rpi3-bt
tce-load -i bluez
sudo modprobe hci_uart but it says that there is not such module
(Vin, there all lots of kernels out there for RPI but AFAIK not all support wifi and bluetooth which are the interfaces I need for my prototype)
-
It was in the .list file. Can you find it on your system.
-
There is a ....hci_uart.ko file in there but it seems that it not not being load, right? as modprobe does not find it
How to load it?
-
Hi imo
Try:
sudo depmod
sudo modprobe hci_uart
-
the run output:
sudo depmod (no error nor output)
sudo modprobe hci_uart ("..not found in modules.dep")
-
Hi
The thread has inspired me further to try with Tinycore.
THe basics already are available to me.
the pleasant idea is the "always clean" booted environment. ..........O__0......
that and it's Free. Fast.
thx
V
-
Great!
-
Yes.
There is network supply (ethernet) here....
TCL is very unique operating system. Stands alone. :D ;D ;D
V