Tiny Core Linux
Tiny Core Base => Raspberry Pi => Topic started by: njs on September 26, 2017, 11:28:39 PM
-
I just installed on Pi Zero and followed instructions in README but I don't see anywhere how to start the desktop GUI.
Appreciate it of someone would point me in the right direction...
Thanks in advance.
-
If the TC.tcz extension is loaded onboot, the desktop starts automatically.
Otherwise load the extension manually and type startx .
-
Thanks. So the following command?
tce-load -i TC.tcz
This returns "TC.tcz not found!" so I guess TC.tcz was not included in the install or is not in the path. Where would I find it?
BTW, I can't use "tce-load -wi TC.tcz" until I get wifi working (Pi Zero has no ethernet)
-
If you have another linux box available which is connected to the internet and is able to mount your SD card, you can download an extension and all of it's deps directly into the /tce/optional directory on your SD cards second partition.
cd /path/to/your/sd-card-2nd-partition/tce/optional
for i in $(wget -O - http://tinycorelinux.net/9.x/armv7/tcz/TC.tcz.tree) ; do wget http://tinycorelinux.net/9.x/armv7/tcz/$i ; wget http://tinycorelinux.net/9.x/armv7/tcz/$i.dep ; wget http://tinycorelinux.net/9.x/armv7/tcz/$i.md5.txt ; done
Note: I don't have a RPi-Zero and I'm not sure if you need the armv6 or armv7 repo so please change the URL if needed.
-
You may want to manually download and install just the WIFI tcz's and once the WIFI is working use the command line app to download the TC.tzc.
It would be less manual installing.
-
I just picked up a pi zero to complete the collection of a Pi2 and Pi3! But...
I wanted to use the usb ethernet adapter I have.
Started from a bare image install. Had to manually download the net-usb-4.9.22-piCore.tcz (V6 version mind you for the zero) and went through the laborious process of adding it to /tce/optional, and adding it to the onboot.lst file from another usb drive from another machine...
So far so good, usb-ethernet is now up and I was able to tce-load -wi TC.tcz.
But no gui joy after several reboots and looking at the filesystem. startx doesn't work. TC.tcz not found.
Guess what - REMOVING the usb stick I used to manually copy the files (/dev/sda) and rebooting automatically launched the gui.
I thought it might have been the power supply, but a 2.5a supply has had no problems with my passive hub, keyboard, mouse, and a usb stick needed to manually copy that file.
I don't know if this is true or not (since I'm not going to try and repeat it), but it seems that the addition of a /dev/sda upon first reboot of piCore after installing TC.tcz got it confused?
-
Tiny Core tries to find a /tce directory on attached devices and uses the first one found.
So if there is one on your USB stick, but without extensions etc., it would be like booting with base norestore boot codes.
You might try adding the tce= boot code to your commandline.txt.
This prevents any searching and might even speed up the boot process.
tce=LABEL="<YOUR_DRIVE_LABEL_HERE>"
tce=LABEL="TC9-SD"
You would need to give the partition a label first. Not sure if it has one by default.
Or maybe this would work too:
tce=mmc0blk2