Tiny Core Linux
Tiny Core Extensions => TCE Talk => Topic started by: manit123 on November 03, 2013, 10:59:41 PM
-
I ran
./amd-driver-installer-catalyst-13-4-x86.x86_64.run
Created directory fglrx-install.CnHJTE
Verifying archive integrity... All good.
Uncompressing AMD Catalyst(TM) Proprietary Driver-12.104........................ ................................................................................ ................................................................................ ................................................................................ ................................................................................ ................................................................................ ................................................................................ ................................................................................ ................................................................................ ................................................................................ ................................................................................ ................................................................................ ................................................................................ ................................................................................ ............................................................................
=====================================================================
AMD Catalyst(TM) Proprietary Driver Installer/Packager
=====================================================================
error: X Server version cannot be detected. (default:v2:i686:lib::none:3.0.21-ti nycore:)
Installation will not proceed.
Removing temporary directory: fglrx-install.CnHJTE
What am I missing ?
-
Which version of tc are you trying to install this on?
"amd-driver-installer-catalyst-13-4-x86.x86_64.run" suggests the 64-bit version of tc, but "i686:lib::none:3.0.21-ti" suggests the 32-bit version.
On my hardware (macmini), I don't require any any additional drivers for to connect a monitor via the hdmi output, albeit connected via an hdmi-dvi adapter.
-
it is 4.7.7 as output by 'version' command.
my graphic card is connected to CRT via VGA & to TV via HDMI . Currently desktop is duplicated on both. This catalyst binary helps to configure extended desktop etc.
catalyst binary works fine with backtrack5 - 32bit.
-
OK, so you're using the 32bit version of tc-4.7.7
Perhaps you need to load the Xorg-7.6-dev extension?
-
installed Xorg-7.6-dev
Now I get
Supported adapter detected.
Check if system has the tools required for installation.
fglrx installation requires that the system have kernel headers. /lib/modules/3.0.21-tinycore/build/include/linux/version.h cannot be found on this system.
fglrx installation requires that the system has make tool. make cannot be found on this system.
fglrx installation requires that the system has gcc tool. gcc cannot be found on this system.
One or more tools required for installation cannot be found on the system. Install the required tools before installing the fglrx driver.
Optionally, run the installer with --force option to install without the tools.
Forcing install will disable AMD hardware acceleration and may make your system unstable. Not recommended.
-
you need to load the compiletc extension and (probably) linux-headers-3.0.21-tinycore
-
Did that .
Also had to install Xorg-7.6-bin.tcz
i get error during compilation
du: invalid option -- 'b' --hdmi monitor post additionally installed Xorg-7.6.tcz
looks like busybox 'du' command does not have -b option (reports all file size in bytes). Can i install any app that helps ? Or any other way ?
-
Hi manit123
Can i install any app that helps ?
Try coreutils.tcz
-
here is sequence of commands (WITH OUTPUT) I ran
$tce-load -i compiletc.tcz coreutils.tcz linux-headers-3.0.21-tinycore.tcz
$tce-load -i Xorg-7.6.tcz Xorg-7.6-dev.tcz
# /home/tc/amd-driver-installer-catalyst-13-4-x86.x86_64.run
Created directory fglrx-install.55Kcgk
Verifying archive integrity... All good.
Uncompressing AMD Catalyst(TM) Proprietary Driver-12.104...
=====================================================================
AMD Catalyst(TM) Proprietary Driver Installer/Packager
=====================================================================
Detected configuration:
Architecture: i686 (32-bit)
X Server: X.Org 6.9 or later
loki_setup: directory: (null)
Removing temporary directory: fglrx-install.55Kcgk
# cat /usr/share/ati/fglrx-install.log
Supported adapter detected.
Check if system has the tools required for installation.
Uninstalling any previously installed drivers.
[Message] Kernel Module : Trying to install a precompiled kernel module.
[Message] Kernel Module : Precompiled kernel module version mismatched.
[Message] Kernel Module : Found kernel module build environment, generating kernel module now.
AMD kernel module generator version 2.1
doing Makefile based build for kernel 2.6.x and higher
rm -rf *.c *.h *.o *.ko *.a .??* *.symvers
make -C /lib/modules/3.0.21-tinycore/build SUBDIRS=/lib/modules/fglrx/build_mod/2.6.x modules
make[1]: Entering directory `/usr/local/src/linux-headers-3.0.21-tinycore'
CC [M] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_agp.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_debug.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_ioctl.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_io.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_pci.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_str.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_iommu.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_wait.o
LD [M] /lib/modules/fglrx/build_mod/2.6.x/fglrx.o
Building modules, stage 2.
MODPOST 1 modules
CC /lib/modules/fglrx/build_mod/2.6.x/fglrx.mod.o
LD [M] /lib/modules/fglrx/build_mod/2.6.x/fglrx.ko
make[1]: Leaving directory `/usr/local/src/linux-headers-3.0.21-tinycore'
build succeeded with return value 0
duplicating results into driver repository...
done.
You must change your working directory to /lib/modules/fglrx
and then call ./make_install.sh in order to install the built module.
- recreating module dependency list
- trying a sample load of the kernel modules
failed.
[Error] Kernel Module : Failed to install compiled kernel module - please consult readme.
# cd /lib/modules/fglrx/
root@box:/lib/modules/fglrx# ./make_install.sh
- recreating module dependency list
- trying a sample load of the kernel modules
modprobe: can't load module fglrx (kernel/drivers/char/drm/fglrx.ko): unknown symbol in module, or unknown parameter
failed.
#/home/tc/amd-driver-installer-catalyst-13-4-x86.x86_64.run --listpkg
Created directory fglrx-install.2fBPYI
Verifying archive integrity... All good.
Uncompressing AMD Catalyst(TM) Proprietary Driver-12.104...
=====================================================================
[31m AMD Catalyst(TM) Proprietary Driver Installer/Packager [0m
=====================================================================
List of generatable packages:
Package Maintainer(s): Aric Cyr <aric.cyr@gmail.com>
Mario Limonciello <superm1@gmail.com>
Status: *UNVERIFIED*
Debian Packages:
Debian/sid
Debian/unstable
Debian/etch
Debian/stable
Debian/lenny
Debian/testing
Debian/experimental
Package Maintainer(s): Niko Mirthes <nmirthes@gmail.com>
Michael Larabel <michael@phoronix.com>
Status: *UNVERIFIED*
Fedora Packages:
Fedora/FC3
Fedora/FC4
Fedora/FC5
Fedora/FC6
Fedora/F7
Fedora/F8
Fedora/F9
Fedora/F10
Fedora/RHEL3
Fedora/RHEL4
Package Maintainer(s): Anssi Hannula <anssi@mageia.org>
Status: *UNVERIFIED*
Mageia Packages:
Mageia/1
Mageia/2
Mageia/3
Package Maintainer(s): Dmitry Mikhirev <dmikhirev@mandriva.org>
Status: *UNVERIFIED*
Mandriva Packages:
Mandriva/2007.0
Mandriva/2007.1
Mandriva/2008.0
Mandriva/2008.1
Mandriva/2009.0
Mandriva/2009.1
Mandriva/2010.0
Mandriva/2010.1
Mandriva/2010.2
Mandriva/2011.0
Mandriva/2012.0
Package Maintainer(s): AMD
Status: Verified
RedHat Packages:
RedHat/RHEL5
RedHat/RHEL6
RedHat/RHEL5_64a
RedHat/RHEL6_64a
Package Maintainer(s): Emanuele Tomasi <tomasi@cli.di.unipi.it>
Status: *UNVERIFIED*
Slackware Packages:
Slackware/Slackware
Package Maintainer(s): Sebastian Siebert <freespacer@gmx.de>
Status: *UNVERIFIED*
SuSE Packages:
SuSE/SLE10-IA32
SuSE/SLE10-AMD64
SuSE/SLE11-IA32
SuSE/SLE11-AMD64
SuSE/SUSE121-IA32
SuSE/SUSE121-AMD64
SuSE/SUSE122-IA32
SuSE/SUSE122-AMD64
SuSE/SUSE123-IA32
SuSE/SUSE123-AMD64
SuSE/SUSE-autodetection
Package Maintainer(s): Alberto Milone <alberto.milone@canonical.com>
Status: *UNVERIFIED*
Ubuntu Packages:
Ubuntu/gutsy
Ubuntu/hardy
Ubuntu/intrepid
Ubuntu/jaunty
Ubuntu/karmic
Ubuntu/lucid
Ubuntu/maverick
Ubuntu/natty
Ubuntu/oneiric
Ubuntu/precise
Ubuntu/quantal
Ubuntu/raring
Ubuntu/source
For example, to build a Debian Etch package, run the following:
% ./amd-driver-installer-<version>-<architecture>.run --buildpkg Debian/etch
Removing temporary directory: fglrx-install.2fBPYI
$tce-load -i dpkg.tcz dpkg-deb.tcz
#/home/tc/amd-driver-installer-catalyst-13-4-x86.x86_64.run --buildpkg Ubuntu/gutsy
Created directory fglrx-install.0Xnps4
Verifying archive integrity... All good.
Uncompressing AMD Catalyst(TM) Proprietary Driver-12.104...
=====================================================================
AMD Catalyst(TM) Proprietary Driver Installer/Packager
=====================================================================
Generating package: Ubuntu/gutsy
-y: line 1: apt-get: not found
Unable to install dpkg-dev. Please manually install and try again.
Error: unsupported architecture:
Removing temporary directory: fglrx-install.0Xnps4
#/home/tc/amd-driver-installer-catalyst-13-4-x86.x86_64.run --buildpkg Debian/etch
Created directory fglrx-install.MYpeHP
Verifying archive integrity... All good.
Uncompressing AMD Catalyst(TM) Proprietary Driver-12.104...
=====================================================================
AMD Catalyst(TM) Proprietary Driver Installer/Packager
=====================================================================
Generating package: Debian/etch
./packages/Debian/ati-packager.sh: line 177: dpkg-architecture: not found
Error: unsupported architecture:
Removing temporary directory: fglrx-install.MYpeHP
-
What does "modinfo /lib/modules/fglrx/build_mod/2.6.x/fglrx.ko" give?
This might show what deps are needed to avoid the "unknown symbol in module, or unknown parameter" error.
-
$modinfo /lib/modules/fglrx/build_mod/2.6.x/fglrx.ko
filename: /lib/modules/fglrx/build_mod/2.6.x/fglrx.ko
description: ATI Fire GL
author: Fire GL - ATI Research GmbH, Germany
license: Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY
vermagic: 3.0.21-tinycore SMP mod_unload 486
depends: agpgart
-
You could try:
$ sudo cp /lib/modules/fglrx/build_mod/2.6.x/fglrx.ko /usr/local/lib/modules/3.0.21-tinycore/kernel/drivers/char/agp
$ sudo depmod -a
$ sudo modprobe fglrx..and see what happens
-
oot@box:/home/tc# ls -al /usr/local/lib/modules/3.0.21-tinycore/kernel/
total 0
drwxr-xr-x 2 root root 40 Apr 15 2012 .
drwxr-xr-x 3 root root 60 Apr 15 2012 ..
root@box:/home/tc# mkdir -p /usr/local/lib/modules/3.0.21-tinycore/kernel/drivers/char/
root@box:/home/tc# cp /lib/modules/fglrx/build_mod/2.6.x/fglrx.ko /usr/local/lib/modules/3.0.21-tinycore/kernel/drivers/char/agp
root@box:/home/tc# depmod -a
root@box:/home/tc# modprobe fglrx
modprobe: can't load module fglrx (kernel/drivers/char/drm/fglrx.ko): unknown symbol in module, or unknown parameter
-
Does "lsmod" show that the agpgart module was loaded? Was the graphics-KERNEL extension loaded?
-
Wondering why the cp path vs. path reported by modprobe would differ.
-
[code$lsmod
]Module Size Used by Tainted: P
powernow_k8 16384 1
mperf 12288 1 powernow_k8
cpufreq_userspace 12288 0
cpufreq_powersave 12288 0
cpufreq_stats 12288 0
cpufreq_conservative 12288 0
oss_usb 90112 0
oss_hdaudio 143360 0
osscore 503808 2 oss_usb,oss_hdaudio
squashfs 24576 42
scsi_wait_scan 12288 0
zcache 12288 0
zram 12288 1
loop 16384 84
ppdev 12288 0
parport_pc 24576 0
pcspkr 12288 0
parport 24576 2 ppdev,parport_pc
atl1c 28672 0
wmi 12288 0
-
The agpgart module is not loaded, so you would need to load that before attempting to load fglrx
-
how to do that ? any tcz i have to install ?
-
See Xorg server .info.
-
$ tce-load -i graphics-KERNEL
$ sudo modprobe agpgart
$ sudo modprobe fglrx
-
after installing graphics-3.0.21-tinycore.tcz , the HDMI & CRT monitor (both attached to graphic card) turned off .
AFter killing xserver (ctrl+alt+backspace) & restarting (startx) . I installed driver successfully (see fglrx-install.log).
Supported adapter detected.
Check if system has the tools required for installation.
Uninstalling any previously installed drivers.
Unloading radeon module...
rmmod: can't unload 'radeon': Resource temporarily unavailable
Unloading drm module...
rmmod: can't unload 'drm': Resource temporarily unavailable
[Message] Kernel Module : Trying to install a precompiled kernel module.
[Message] Kernel Module : Precompiled kernel module version mismatched.
[Message] Kernel Module : Found kernel module build environment, generating kernel module now.
AMD kernel module generator version 2.1
doing Makefile based build for kernel 2.6.x and higher
rm -rf *.c *.h *.o *.ko *.a .??* *.symvers
make -C /lib/modules/3.0.21-tinycore/build SUBDIRS=/lib/modules/fglrx/build_mod/2.6.x modules
make[1]: Entering directory `/usr/local/src/linux-headers-3.0.21-tinycore'
CC [M] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_agp.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_debug.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_ioctl.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_io.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_pci.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_str.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_iommu.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl.o
CC [M] /lib/modules/fglrx/build_mod/2.6.x/kcl_wait.o
LD [M] /lib/modules/fglrx/build_mod/2.6.x/fglrx.o
Building modules, stage 2.
MODPOST 1 modules
CC /lib/modules/fglrx/build_mod/2.6.x/fglrx.mod.o
LD [M] /lib/modules/fglrx/build_mod/2.6.x/fglrx.ko
make[1]: Leaving directory `/usr/local/src/linux-headers-3.0.21-tinycore'
build succeeded with return value 0
duplicating results into driver repository...
done.
You must change your working directory to /lib/modules/fglrx
and then call ./make_install.sh in order to install the built module.
- recreating module dependency list
- trying a sample load of the kernel modules
done.
Following appears as /etc/X11/xorg.conf
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Now$sudo modprobe fglrx
$ lsmod
Module Size Used by Tainted: P
fglrx 4337664 0
radeon 516096 1
drm_kms_helper 20480 1 radeon
ttm 36864 1 radeon
drm 106496 3 radeon,drm_kms_helper,ttm
agpgart 24576 3 fglrx,ttm,drm
backlight 12288 1 radeon
i2c_algo_bit 12288 1 radeon
i2c_piix4 12288 0
powernow_k8 16384 1
cpufreq_stats 12288 0
mperf 12288 1 powernow_k8
cpufreq_userspace 12288 0
cpufreq_powersave 12288 0
cpufreq_conservative 12288 0
oss_usb 90112 0
oss_hdaudio 143360 0
osscore 503808 2 oss_usb,oss_hdaudio
squashfs 24576 44
scsi_wait_scan 12288 0
zcache 12288 0
zram 12288 1
loop 16384 88
ppdev 12288 0
parport_pc 24576 0
atl1c 28672 0
parport 24576 2 ppdev,parport_pc
pcspkr 12288 0
wmi 12288 0
i thought of restarting X server but killing ' /usr/local/bin/Xorg -nolisten tcp' leaves me with a black screen & cursor blinking at top right , hard reboot seems to only work.
-
i thought of restarting X server but killing ' /usr/local/bin/Xorg -nolisten tcp' leaves me with a black screen & cursor blinking at top right , hard reboot seems to only work.
You can try if SysRq still works.
What about blacklisting the radeon driver and see what happens then.
Also, please consider changing the topic, as this is specific to the flgrx proprietary driver, but not at all to HDMI.
-
'failed in wait for x' after fglrx , agpgart module has been loaded
-
Try "Xorg -nolisten tcp" instead of "startx" to troubleshoot
-
$lsmod
Module Size Used by Tainted: P
fglrx 4337664 0
powernow_k8 16384 1
mperf 12288 1 powernow_k8
cpufreq_userspace 12288 0
cpufreq_stats 12288 0
cpufreq_conservative 12288 0
cpufreq_powersave 12288 0
oss_usb 90112 0
oss_hdaudio 143360 0
osscore 503808 2 oss_usb,oss_hdaudio
radeon 516096 1
drm_kms_helper 20480 1 radeon
ttm 36864 1 radeon
drm 106496 3 radeon,drm_kms_helper,ttm
agpgart 24576 3 fglrx,ttm,drm
backlight 12288 1 radeon
i2c_algo_bit 12288 1 radeon
i2c_piix4 12288 0
squashfs 24576 0
scsi_wait_scan 12288 0
zcache 12288 0
zram 12288 1
loop 16384 0
$Xorg -nolisten tcp
X.Org X Server 1.11.0
Release Date: 2011-08-26
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.0.3-tinycore i686
Current Operating System: Linux box 3.0.21-tinycore #3021 SMP Sat Feb 18 11:54:11 EET 2012 i686
Kernel command line: waitusb=10 loop.max_loop=256 lst=gdg.lst mydata=gdg
Build Date: 23 September 2011 05:05:20PM
Current version of pixman: 0.30.0
Before reporting problems, check www.tinycorelinux.com
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec 2 22:00:58 2013
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/local/share/X11/xorg.conf.d"
(EE) Failed to load module "fglrx" (module does not exist, 0)
(EE) No drivers available.
Fatal server error:
no screens found
Please consult the TinyCore Linux support
at www.tinycorelinux.com
for help
xorg.0.log
[ 218.594]
X.Org X Server 1.11.0
Release Date: 2011-08-26
[ 218.594] X Protocol Version 11, Revision 0
[ 218.594] Build Operating System: Linux 3.0.3-tinycore i686
[ 218.594] Current Operating System: Linux box 3.0.21-tinycore #3021 SMP Sat Feb 18 11:54:11 EET 2012 i686
[ 218.594] Kernel command line: waitusb=10 loop.max_loop=256 lst=gdg.lst mydata=gdg
[ 218.594] Build Date: 23 September 2011 05:05:20PM
[ 218.594]
[ 218.594] Current version of pixman: 0.30.0
[ 218.594] Before reporting problems, check www.tinycorelinux.com
to make sure that you have the latest version.
[ 218.594] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 218.595] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec 2 22:00:58 2013
[ 218.595] (==) Using config file: "/etc/X11/xorg.conf"
[ 218.595] (==) Using system config directory "/usr/local/share/X11/xorg.conf.d"
[ 218.595] (==) ServerLayout "aticonfig Layout"
[ 218.595] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 218.595] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 218.596] (**) | |-->Device "aticonfig-Device[0]-0"
[ 218.596] (==) Not automatically adding devices
[ 218.596] (==) Not automatically enabling devices
[ 218.596] (WW) The directory "/usr/lib/X11/fonts/TTF/" does not exist.
[ 218.596] Entry deleted from font path.
[ 218.596] (WW) The directory "/usr/lib/X11/fonts/OTF/" does not exist.
[ 218.596] Entry deleted from font path.
[ 218.596] (WW) The directory "/usr/lib/X11/fonts/Type1/" does not exist.
[ 218.596] Entry deleted from font path.
[ 218.596] (WW) The directory "/usr/lib/X11/fonts/100dpi/" does not exist.
[ 218.596] Entry deleted from font path.
[ 218.596] (==) FontPath set to:
/usr/lib/X11/fonts/misc/,
/usr/lib/X11/fonts/75dpi/
[ 218.596] (==) ModulePath set to "/usr/local/lib/X11/modules"
[ 218.596] (==) |-->Input Device "<default pointer>"
[ 218.596] (==) |-->Input Device "<default keyboard>"
[ 218.596] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 218.596] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 218.596] (II) Loader magic: 0x818a5d0
[ 218.596] (II) Module ABI versions:
[ 218.596] X.Org ANSI C Emulation: 0.4
[ 218.596] X.Org Video Driver: 11.0
[ 218.596] X.Org XInput driver : 13.0
[ 218.596] X.Org Server Extension : 5.0
[ 218.597] (--) PCI:*(0:1:0:0) 1002:68f9:1682:303a rev 0, Mem @ 0xd0000000/268435456, 0xfeae0000/131072, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[ 218.597] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 218.597] (II) "extmod" will be loaded by default.
[ 218.597] (II) "dbe" will be loaded by default.
[ 218.597] (II) "glx" will be loaded by default.
[ 218.597] (II) "record" will be loaded by default.
[ 218.597] (II) "dri" will be loaded by default.
[ 218.597] (II) "dri2" will be loaded by default.
[ 218.597] (II) LoadModule: "extmod"
[ 218.597] (II) Loading /usr/local/lib/X11/modules/extensions/libextmod.so
[ 218.597] (II) Module extmod: vendor="X.Org Foundation"
[ 218.597] compiled for 1.11.0, module version = 1.0.0
[ 218.597] Module class: X.Org Server Extension
[ 218.597] ABI class: X.Org Server Extension, version 5.0
[ 218.597] (II) Loading extension MIT-SCREEN-SAVER
[ 218.597] (II) Loading extension XFree86-VidModeExtension
[ 218.597] (II) Loading extension XFree86-DGA
[ 218.597] (II) Loading extension DPMS
[ 218.597] (II) Loading extension XVideo
[ 218.597] (II) Loading extension XVideo-MotionCompensation
[ 218.597] (II) Loading extension X-Resource
[ 218.597] (II) LoadModule: "dbe"
[ 218.597] (II) Loading /usr/local/lib/X11/modules/extensions/libdbe.so
[ 218.598] (II) Module dbe: vendor="X.Org Foundation"
[ 218.598] compiled for 1.11.0, module version = 1.0.0
[ 218.598] Module class: X.Org Server Extension
[ 218.598] ABI class: X.Org Server Extension, version 5.0
[ 218.598] (II) Loading extension DOUBLE-BUFFER
[ 218.598] (II) LoadModule: "glx"
[ 218.598] (II) Loading /usr/local/lib/X11/modules/extensions/libglx.so
[ 218.598] (II) Module glx: vendor="X.Org Foundation"
[ 218.598] compiled for 1.11.0, module version = 1.0.0
[ 218.598] ABI class: X.Org Server Extension, version 5.0
[ 218.598] (==) AIGLX enabled
[ 218.598] (II) Loading extension GLX
[ 218.598] (II) LoadModule: "record"
[ 218.598] (II) Loading /usr/local/lib/X11/modules/extensions/librecord.so
[ 218.598] (II) Module record: vendor="X.Org Foundation"
[ 218.598] compiled for 1.11.0, module version = 1.13.0
[ 218.598] Module class: X.Org Server Extension
[ 218.598] ABI class: X.Org Server Extension, version 5.0
[ 218.598] (II) Loading extension RECORD
[ 218.598] (II) LoadModule: "dri"
[ 218.598] (II) Loading /usr/local/lib/X11/modules/extensions/libdri.so
[ 218.598] (II) Module dri: vendor="X.Org Foundation"
[ 218.598] compiled for 1.11.0, module version = 1.0.0
[ 218.598] ABI class: X.Org Server Extension, version 5.0
[ 218.598] (II) Loading extension XFree86-DRI
[ 218.598] (II) LoadModule: "dri2"
[ 218.598] (II) Loading /usr/local/lib/X11/modules/extensions/libdri2.so
[ 218.598] (II) Module dri2: vendor="X.Org Foundation"
[ 218.598] compiled for 1.11.0, module version = 1.2.0
[ 218.598] ABI class: X.Org Server Extension, version 5.0
[ 218.598] (II) Loading extension DRI2
[ 218.598] (II) LoadModule: "fglrx"
[ 218.599] (WW) Warning, couldn't open module fglrx
[ 218.599] (II) UnloadModule: "fglrx"
[ 218.599] (II) Unloading fglrx
[ 218.599] (EE) Failed to load module "fglrx" (module does not exist, 0)
[ 218.599] (II) LoadModule: "mouse"
[ 218.599] (II) Loading /usr/local/lib/X11/modules/input/mouse_drv.so
[ 218.599] (II) Module mouse: vendor="X.Org Foundation"
[ 218.599] compiled for 1.11.0, module version = 1.7.1
[ 218.599] Module class: X.Org XInput Driver
[ 218.599] ABI class: X.Org XInput driver, version 13.0
[ 218.599] (II) LoadModule: "kbd"
[ 218.599] (II) Loading /usr/local/lib/X11/modules/input/kbd_drv.so
[ 218.599] (II) Module kbd: vendor="X.Org Foundation"
[ 218.599] compiled for 1.11.0, module version = 1.6.0
[ 218.599] Module class: X.Org XInput Driver
[ 218.599] ABI class: X.Org XInput driver, version 13.0
[ 218.599] (EE) No drivers available.
[ 218.599]
Fatal server error:
[ 218.599] no screens found
[ 218.599]
Please consult the TinyCore Linux support
at www.tinycorelinux.com
for help.
[ 218.599] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 218.599]
-
Xorg is looking for a driver named /usr/local/lib/X11/modules/drivers/fglrx_drv.so, not to be confused with the kernel module fglrx.ko
Maybe you need the ati Xorg driver and the fglrx kernel module?
-
i got driver from http://support.amd.com/en-us/download/desktop?os=Linux%20x86
I will try to follow https://help.ubuntu.com/community/BinaryDriverHowto/ATI
Then get back.
-
Hi manit123
Did you try using the ATI packages from the repo?
ati-catalyst.tcz
ati-fglrx-kernel-source.tcz
ati-fglrx.tcz
-
Not yet.
Will do.
BTW ,
$sudo aticonfig --lsa
* 0. 01:00.0 ATI Radeon HD 5450
* - Default adapter
#Even though fglrx module is loaded , still
$sudo fglrxinfo
Error: unable to open display (null)
#after I create a link in /usr/local/lib/X11/modules/extension to /usr/lib/xorg/modules/drivers/flgrx_drv.so
#I get a black frozen screen with _ on top left corner
-
Hi manit123
Be sure to read the info file for ati-fglrx.tcz
#after I create a link in /usr/local/lib/X11/modules/extension to /usr/lib/xorg/modules/drivers/flgrx_drv.so
usr/local/lib/X11/modules/drivers/fglrx_drv.so is provided by ati-fglrx.tcz
-
After following ati-fglrx.tcz.info step by step (including xorg-7.5)
I got
$fgl_glxgears
Xlib: extension "GLX" missing on display ":0.0".
Using GLX_SGIX_pbuffer
Error: couldn't get an RGBA, Double-buffered visual
Please see attached xorg.0.log (if 'Xorg -nolisten tcp' is run)