Tiny Core Linux
Tiny Core Base => Raspberry Pi => Topic started by: bellad on May 29, 2013, 01:10:52 AM
-
hello,
thank you for your work
i search tcz owfs and i2c tools for 1wire and ds2482-100
but I can not find for rpi
thank
-
hello,
thank you for your work
i search tcz owfs and i2c tools for 1wire and ds2482-100
but I can not find for rpi
thank
There are no such apps in the repo. Can you provide links to upstream source code you are missing for RPi?
-
thank bmarkus
for owfs : sourceforge.net/projects/owfs/files/owfs/2.9p0/
for i2c-tools : dl.lm-sensors.org/i2c-tools/releases/i2c-tools-3.1.0.tar.bz2
-
Both owfs and i2c-tools compiles on piCore so .tcz's can be created. However I can't test them as do not have any 1-wire hardware.
-
I want good that you made compile and i try with my component ( ds2482-100 + ds1820 )
I'll let you know
sorry for my bad english , i use google translat
thank you
73
-
hello
i try install compile-essentials.tcz , but error
I think I do not have enough space on the sdcard
i try enlarge with Gparted but error
howto enlarge sdcard space ?
thank
-
hello
i try install compile-essentials.tcz , but error
I think I do not have enough space on the sdcard
i try enlarge with Gparted but error
howto enlarge sdcard space ?
thank
Where is your tce directory?
-
i2c-tools added to repo
-
Thank you very much for ic2-tool , I test as soon as I have a moment
my tce directory : /mnt/mmcblk0p1
size 37.2M : used 22.5M : available : 14.7M
howto resize ?
or format libre space ( fat32 ext ?)and move tce directory ?
-
Do not use /mnt/mmcblk0p1, keep it untouched. Create a new Linux ext4 partition and a swap on unpartitioned part of SD card than create a tce directory on the new Linux partition. After reboot piCore will use it automatically to store downloaded extensions and to keep backups.
-
ok thank ,
the swap partition used just for the compiled program ?
-
ok thank ,
the swap partition used just for the compiled program ?
Linux systems need swap partition by default. While it is not a must have, running without swap is an exception and soon you can face to out of memory situations specially compiling bigger applications or running memory hungry programs. Having a 4G or larger SD card can't be a problem to have 512M swap.
Alternatively you can use swap file instead of partition. Benefit is you can change it's size flexibly or omit at all. It is not mounted automatically, you must add it to bootlocal.sh
-
i have make ext4 partition , create tce directory and put mount on bootlocal.sh
when reboot i have tce directory on /mnt/mmckbl0p2 but howto config change tce directory , no automatic ?
I had to miss something
-
i have make ext4 partition , create tce directory and put mount on bootlocal.sh
when reboot i have tce directory on /mnt/mmckbl0p2 but howto config change tce directory , no automatic ?
I had to miss something
What do you want to reach?
-
sorry for my english ,
ok this good ,
i did tce-setup -s /mnt/mmcblk0p2/tce
-
hello bmarkus
i tried i2c-tools and it's ok with ds2482 component , i've compiled owfs but i wait ds1820 for test
-
hello bmarkus
i tried i2c-tools and it's ok with ds2482 component , i've compiled owfs but i wait ds1820 for test
Thanks for the feedback. I have owfs.tcz but need some free time to add it to the repo.
-
oh thank , have you fuse compile ( fuse.ko ) ?
i want try compile fuse.ko but have you the kernel header of 3.8.13-PiCore , beacause when try compile fuse , error " kernel source directory not found "
thank
-
hello, no news , Is there a problem?
-
hello, no news , Is there a problem?
Be specific. What are you asking for?
-
Dear Béla
That goes to show my english is bad
for test my owfs : owfs use fuse
i succeeded owfs compile , but no compile fuse ( i believe , it is included in kernel 3.8.13) but he cannot do it
can you put kernel header of 3.8.13-PiCore or remake img with fuse ?
have you put your owfs.tcz in repo ?
Thank you and sorry
-
hello Béla
I saw on tv Budapest
I hope you are not in the flooding
-
hello Béla
I saw on tv Budapest
I hope you are not in the flooding
Thanks, we are fine. Budapest is well prepared for such flooding and there is a usual Saturday night city. Roads running parallel to Danube are closed, there are traffic lights and signs with top 40cm out of water and few buildings are closed including tram stations so there are some traffic issues, but it's OK. Country side is different, few villages are evacuated and can't be accessed.
-
hello,
after owfs compiled , i test with ds2482-100 ( i2c > 1wire ) and ds18b20 ( temperature ) is good . No use owfs deamon ( because i cannot compile Fuse ) , but with owserver deamon.
first : modprobe i2c-dev i2cdetect -y 0 or i2cdetect -y 1 ( for the ds2482-100 ) , i see the ds2482-100 at /dev/i2c-1
second : sudo ./owserver -d /dev/i2c-1 -p 3001sudo ./owhttpd -s 3001 -p 8080
with internet browser i see my ds18b20 with http:// ( ip of Rpi ):8080
Béla , if you want, I can test your compile owfs , when you have free time , put your owfs.tcz in repo . thank
-
Install filesystems-3.8.13-piCore.tcz from the repo, it will provide fuse.ko kernel module. You may need to load it manually with
modprobe fuse
-
thank , but , regrettably , he request libfuse.so.2
-
thank , but , regrettably , he request libfuse.so.2
It is in the queue already
-
oh , you are rapid
-
fuse.tcz added to the repo
-
owfs.tcz added to repo. Please try. It is a blind build, as I do not have any 1-Wire hardware.
-
hello,
excellent work , after new image tiny core on sd card .
download i2c-tools.tcz , fuse.tcz , owfs.tcz
-
Thanks for the feedback. There are few features disabled build time like PHP support as it is not yet in the repo, but can be added later. Good to hear it is usable :) One more field for piCore use.
-
for keep size sdcard img ~ 40 M , no dependances need : tcl.tcz on owfs.tcz , and i2c-tools.tcz no need perl5.tcz
step 2: MCP32017 with phyton language , need python-smbus module ( in i2c-tools ) py-smbus compile , can you put in i2c-tools.tcz ?
thank you
-
tcl.tcz is a soft depenedency, needed only for tcl scripts. I will remove from the .dep list and mention in .info file. Same for perl5
-
(http://st.depositphotos.com/2074779/2571/i/110/depositphotos_25717015-thumbs-up.jpg)
-
Dallas 1-wire kernel modules added to repo, see
w1-3.8.13-002.piCore.tcz
-
ok , I will test when I will have free time
but i dont see , in repo , wiringPI2
I have done bad ?
-
I need some time too
-
I can't seem to get this to work for mine, what are the exact steps you took to get this working on your machine?
-
I can't seem to get this to work for mine, what are the exact steps you took to get this working on your machine?
Please be more specific what are you doing and what is happening.
-
Apologies, see my post http://forum.tinycorelinux.net/index.php/topic,15958.0.html for specifics on what I have tried and seen.
-
I see. Currently I do not have hardware to test, I will grab a temp sensor.