Tiny Core Linux
General TC => Tiny Core on Virtual Machines => Topic started by: killroy on June 12, 2012, 03:34:03 PM
-
Attempting to install TinyCore on VMware ESXi 5.0. During installation, however, I receive an error stating "Unable to mount USB device". This is a server and will never use a USB device (except maybe for a BIOS update). Anyone know why I could be receiving this error?
Installation options selected are:
frugal
whole disk
fd0
install boot loader checked
ext3 or ext4 (both result in the same error)
core and x/gui desktop selected
During installation, I receive the following responses:
Writing zero's to beginning of /dev/fd0
Partitioning /dev/fd0
/dev/fdo:
Formatting /dev/fd01
Error mounting usb device
At that point the install process halts.
Thanks for the help.
-
fd0?
Tiny Core doesn't install to floppies.
-
Ah. I made the assumption that fd0 meant fixed disk 0. The ESXi server doesn't have a floppy disk and the virtual machine doesn't have a floppy disk device defined so it didn't dawn on me that fd0 would mean a floppy disk, though it's quite obvious to me now.
In my previous attempts, tc-install did not show either hda or sda during install; only fd0 and sr0. So I changed the virtual hard disk definition from a SCSI drive to an IDE drive and then it installed just fine.
Thanks for helping jump start my brain.
-
You're welcome.
-
In my previous attempts, tc-install did not show either hda or sda during install; only fd0 and sr0. So I changed the virtual hard disk definition from a SCSI drive to an IDE drive and then it installed just fine.
If you do a remaster (I prefer dynamic), you can add the needed SCSI modules to be loaded on boot and see the different SCSI controller types.