WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: piCore for the H3 boards - Orange Pi, Nano Pi etc.  (Read 6245 times)

Offline jgrulich

  • Sr. Member
  • ****
  • Posts: 341
    • GRULICH DESIGN - R&D Lab.
Re: piCore for the H3 boards - Orange Pi, Nano Pi etc.
« Reply #60 on: December 15, 2016, 01:38:14 AM »
Good news. I've ported the piCore on the new Orange Pi Zero. Non with the 3.4.113 kernel.
The board works well, the idle consumption is 100mA@240MHz, the peak full speed consumption is 240mA@1,2GHz.
Compared with RPi3, the boot time is twice, but than the speed is comparable.
The on board wifi is working too, but not as good as the external Realtek based one. Seems that there are still some issues with the wifi driver and need tweak.

Offline SlowBro

  • WikiUser
  • *
  • Posts: 2
Re: piCore for the H3 boards - Orange Pi, Nano Pi etc.
« Reply #61 on: May 12, 2017, 03:15:47 PM »
Newbie question: How would I install it to the OPi Zero; any differences from other boards?

Offline SlowBro

  • WikiUser
  • *
  • Posts: 2
Re: piCore for the H3 boards - Orange Pi, Nano Pi etc.
« Reply #62 on: July 17, 2017, 01:24:02 AM »
So... is tiny a dead end on the OPi Zero? I've been looking for something, anything, how to install it.

Offline Murky

  • WikiUser
  • *
  • Posts: 1
Re: piCore for the H3 boards - Orange Pi, Nano Pi etc.
« Reply #63 on: August 05, 2017, 03:47:23 PM »
This link no exist more.
newbielink:https://dl.dropboxusercontent.com/u/86461636/piCore8.0_h3.7z [nonactive]
please upload again.