WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: few errors at boot on a dell optiplex gx280; how to stop the errors?  (Read 1745 times)

Offline floppy

  • Hero Member
  • *****
  • Posts: 577
Hello,
I booted a DELL Optiplex GX280 (/0G8310, BIOS A04 02/09/2005) with TCL + xorg76.
So far, everything is fine.
Only few errors (see the dmesg.txt) which can be partially seen at boot

....
[drm] initialized overlay support
[drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 128
Raw EDID:
<3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
<3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
<3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
<3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
<3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
<3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
<3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
<3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................

[drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 21
Raw EDID:
<3>00 ff ff ff ff ff ff 00 26 cd 44 17 00 00 00 00  ........&.D.....
<3>03 0a 01 01 0e 20 18 94 c8 00 b8 a0 57 49 9b 26  ..... ......WI.&
<3>10 48 4c 3f ef fc 31 4a 49 4f 61 4f a9 4f 01 01  .HL?..1JIOaO.O..
<3>01 01 01 01 01 01 00 00 00 fe 00 00 00 00 00 00  ................
<3>00 00 00 00 00 00 00 00 00 00 00 fe 00 00 00 00  ................
<3>00 00 00 00 00 00 ff ff ff ff ff ff ff ff ff ff  ................
<3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
<3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
....

How to stop this? (dont seems to distrurb really; is only not very clean).
If any Idea is proposed, it would be great.
In parallel, I will further search on the web for any solution.
AMD K6-IIIATZ 550MHz MB DFI K6xv3/+66
P4 HP DC7100 3GB 3GHz
Samsung NC10 boot from SD card port (via USB reader)
.. all TinyCore proofed

Offline curaga

  • Administrator
  • Hero Member
  • *****
  • Posts: 10957
Re: few errors at boot on a dell optiplex gx280; how to stop the errors?
« Reply #1 on: June 09, 2012, 08:36:31 AM »
You should just ignore those, many screen manufacturers have such invalid EDID embedded in the screens. I don't think you can silence them with a parameter either.
The only barriers that can stop you are the ones you create yourself.