WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: Core v4.5.2  (Read 7108 times)

Offline bmarkus

  • Administrator
  • Hero Member
  • *****
  • Posts: 5165
    • My Community Forum
Re: Core v4.5.2
« Reply #30 on: May 11, 2012, 08:36:53 AM »
Hmmm, reviving old thread on virt.machines :
could we have/do we already have, lxc ready kernel for last TCL version? (now 4.5.2.
and extra question : any one, then, able to build a tcz extension with the tcl toys^Wtools?
thanks a lot for the fine work.
clu
(also posting in the news thread)

Please do not double post.
Béla
Ham Radio callsign: HA5DI

"Amateur Radio: The First Technology-Based Social Network."

Offline coreplayer2

  • Hero Member
  • *****
  • Posts: 1659
Re: Core v4.5.2
« Reply #31 on: May 11, 2012, 09:31:20 AM »
It's my understanding that waitusb=10 provides only a maximum time to wait for detection, meaning that after after USB device detection the boot process continues regardless if the process only took 5 seconds to detect the hardware.

That's my understanding, however if the config file is specifically set to say waitusb=20 you'll sit waiting for the exact full 20 seconds after the line " Starting udev daemon....." is displayed before boot process continues.

Is that right??
« Last Edit: May 11, 2012, 09:38:39 AM by coreplayer2 »

Offline gerald_clark

  • TinyCore Moderator
  • Hero Member
  • *****
  • Posts: 3499
Re: Core v4.5.2
« Reply #32 on: May 11, 2012, 09:41:17 AM »
You have to specify the device if you don't want to wait the full 20 seconds.

Offline coreplayer2

  • Hero Member
  • *****
  • Posts: 1659
Re: Core v4.5.2
« Reply #33 on: May 11, 2012, 10:05:15 AM »
Thanks, I think the only device we would be interested in is sdb1 so for example:  waitusb=20 tce=sdb1,  then why not waitusb=20 tce=sd?    by defining the usb are we only specifying the obvious, effectively is there really a choice?

While I think about the process, I'm assuming this will be adequate?  waitusb=20 tce=sdb1

Offline gerald_clark

  • TinyCore Moderator
  • Hero Member
  • *****
  • Posts: 3499
Re: Core v4.5.2
« Reply #34 on: May 11, 2012, 10:56:55 AM »
Because that is not the proper syntax. Read the wiki.
http://wiki.tinycorelinux.net/wiki:install_hd?s[]=waitusb

Offline coreplayer2

  • Hero Member
  • *****
  • Posts: 1659
Re: Core v4.5.2
« Reply #35 on: May 11, 2012, 11:51:33 AM »

Thanks, unfortunately after looking at the WAITUSB script I noticed the blkid -lt options.  Since I have only limited control over these two parameters; LABEL and UUID    I guess I'll have to either replace blkid -lt  with blkid  to accept /dev/sdb1   or set waitusb=15 to avoid the "Call Trace" errors we are seeing frequently, because 10 seconds is not always a sufficient timeout period.

 :-\


PS maybe I'm reading the -t option wrong..?    perhaps we can specify waitusb=5:/dev/sdb1  ??
« Last Edit: May 11, 2012, 11:57:37 AM by coreplayer2 »

Offline Rich

  • TinyCore Moderator
  • Hero Member
  • *****
  • Posts: 4262
Re: Core v4.5.2
« Reply #36 on: May 11, 2012, 12:01:31 PM »
Hi coreplayer2
This is not right place for that discussion, TCB Talk would be more appropriate.

Offline coreplayer2

  • Hero Member
  • *****
  • Posts: 1659
Re: Core v4.5.2
« Reply #37 on: May 11, 2012, 12:16:33 PM »
lol I know but it's kinda hard to move once you've begun the discussion..   Thought it may have been a change in this release but was wrong about that.